More than 50,000 kilometers of throttle cleaning
OdeliaMacArthur 
12 After cleaning the throttle valve in about 35,000 kilometers in 2019, I have already traveled nearly 20,000 kilometers. In fact, there is no need to clean it up. I originally planned to wash it again next year, but I went to Qingdao City on September 30th. Then, a pneumonia epidemic occurred in Qingdao City. The day before, the company informed me that I would go home and had a nucleic acid test and everything was normal before going to work. It was really boring to wait for news at home. After getting up and walking around twice, I’d better clear the throttle of my car to relieve the boredom
The first step is that I cut off the negative level. If the car owner doesn’t remove it, it’s okay to do so.
The car engine shield is just this screw, remove it
The car engine shield is just this screw, remove it
The screws that fix the intake air are also removed, which saves more time when moving the pipes and does not need to be removed
Use such an inner plum head for the whole process, 30
Remove the screws, remove the oil supply cap, and put the hood up? unplug the
Remove the guard and cover the oil cover to avoid getting in dirt
What it looks like after demolition
Remove the fixing screws for the intake and car throttle valve
Remove the screw, pull out the air inlet vigorously, and use a screwdriver to pry it from below if you have difficulty
The fixed car throttle has 4 screws, all removed
There is a wire landing on the lower left. Don’t forget to press it when installing it.
Skipping the intake air to one side will facilitate other operating steps
Car throttle power supply, turn the red one up?? Pull up, press black, and remove
After removing the car throttle, the green air intake you see is a sealing rubber ring. Don’t remove it.
Throttle cleaner, I just use the soaked one. It’s very good. Spray it on and wait for 3 minutes
You can use this for about 40 times N times
The back is also so dirty
Cover the air intake with cloth. Don’t fall in anything unclean, otherwise it will be a tragedy.
After 3 minutes, gently rub it with a soft-bristled toothbrush
Wipe it clean with a dry, still soft rag
wiped clean
wiped clean
Install back to position
installation is complete
Self-inspection method, using previous drawings
After that, he used the excellent driving box to test it
everything is normal
everything is normal
everything is normal
everything is normal
Everything is normal, the 30-second idle speed dropped from 1,400 to 780
with a hoodie like this.
Completed customs clearance
I hope that the post can help all car owners. I hope everything will be well for everyone.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
