The Wrangler Robin Hood balance bar is completely removed to teach you how to maintain it!
SamanthaDunlop 
9 
The Wrangler Robin Hood balance bar is particularly prone to failure when entering water. What exactly is this device like… Remove it!
Remove the motor and open the fork assembly. There is butter inside. Is this butter? It’s like this, and the motor can’t hold it at all.
Heavy taste, the price of playing with water. Say, ten Robin Hood and nine balance bars are bad, mainly caused by water entering the water after wading. Anyway, is a horse ranger who doesn’t play with water still called a horse ranger? haha!
Check two aspects: on the one hand, whether the fork part is rusted. As shown in the picture, mine has been rusted. After polishing, it will be restored to its original state, and pay attention to the gap.
Wow, this is what it should look like. A car can’t be reckless, but you must love it and know how to take care of it so that it won’t leave you on the road.
Re-butter the fork part, remove and repair the balance bar part once every 10,000 kilometers, and often use water for maintenance every 3000 to 5000 yuan in summer.
Robin Hood without the balance bar disconnection function is not called Robin Hood! Let’s talk about the motor part next.
Water entering the motor and circuit board is another reason for the failure of the balance bar function. The silver lever is used for sensing, and the thick black one below is the extension lever that pushes the shift fork. The small motor drives the gear set and slowly Pushes out the extension lever, thereby separating the shift fork and disconnecting the balance bar.
At this point, some people will ask, how to avoid failure? In addition to frequently cleaning the fork part to avoid raw embroidery, it must be waterproof. Anti-splash water is not waterproof… Everyone still has to treat your car like a lover! After all, it is not your life, but you are all it has!
I wish the Aika National Charity Rescue Team thrive!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
