[Xindong Late Autumn] Six guarantees solve the problem of leaking trunk lid

  13
 September 12, 2024
Our Xiaobai was unfortunately rear-ended before, and even the trunk lid was deformed. She had no choice but to go to a 4S shop to repair the car. The back trunk lid was missing for more than half a month before it was repaired. We urgently took Xiaobai to take him home. But when opening the trunk lid on rainy days, water always drips out from the inside of the trunk lid, which is very strange. Because I have to use the car every day, I am not in a hurry to check it. This week, it is up to maintenance time, so I can ask the 4S shop master to check it well.
The mechanic opened all the rubber pads and wiring ports on the inside of the trunk cover and checked them. He used a water pipe to water the car roof, but there was still a water leak problem. The mechanic was sweating profusely and couldn’t find the leak after struggling for an hour. place. I just need to remove the trunk lid.
Later, there was really no choice, so I held the trunk lid and checked it one by one centimeters. I found that there were a one-centimeter-long opening on both sides of the curved corner of the side of the trunk. I could only suspect it, regardless of whether I found glue to plug it first. I tried watering again, and it really didn’t leak!
I don’t know if other friends have encountered similar problems. My Chinese is not good, so I may not have made it clear. The picture above shows.

4S store layout

There is also a raffle

The 4S store has spare time activities, but I don’t have any

The car has arrived at the station

Prepare to clean the engine first for oil change

I wonder if the cleaning agent I used is good or not

Does this air filter have to be replaced?

This is the oil I use every time.

This is coolant

Try the water somewhere else

The master began to remove the cushions in the trunk

Watering simulates rain

The master drilled into the trunk to find leaks

The hole at the right corner is obvious

There is also a narrow and long hole at the left corner

Plug it up with glue and the problem solved

What an atmospheric ass, dry the glue