[Car bumps] Change the recorder bracket until you are satisfied
RubyJoe 
12 In the early stage, because the driving recorder bracket was damaged, I modified it myself, but many riders also questioned the effect of the modification. Indeed, in actual use, I also found similar problems, so I decided to renovate it again.
The current status of the recorder is directly fixed on the rearview mirror bracket after modification. Existing problems will affect the line of sight!
This is the stent.
After looking through it again, I only found these things. It seems that I can only modify them in this kind of thing.
I need this suction cup, so I remove everything else.
It was removed smoothly.
The recorder needs to be connected to the suction cup.
This is also good, you just need to fix it.
Just like this, this paragraph is fixed.
I took it to the car and tried it, and found that the connection mechanism in the middle was too long, which affected the line of sight.
Looking at it from the side, you can see that it hangs down too much.
After thinking about it, we should move the connection directly to the side to shorten the distance.
Just saw off the excess suction cups.
Then polish it.
Rough enough to stick.
Now just fix these two objects.
Again, there is no AB glue that cannot be solved. If there is, then 2 boxes.
Apply more dots to ensure the glue is in place.
Make sure to apply properly at the joints.
Make sure to apply properly at the joints.
Finally put it together.
I tried it and it was very firm.
Take it to the car for installation.
Adjust the angle and make it perfect.
Power on was smooth and the effect was very good.
Basically, the rearview mirrors are parallel, so that the line of sight is not affected, and the effect is also very good, achieving the goal.
Overall, the effect is good. After a lot of hard work, I have successfully transformed it. I think this is the fun of doing it yourself. I have achieved the goal and have a great sense of accomplishment, haha.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
