Buick GL8 maintenance case, Antifreeze leaked from the rear heating water pipe of the fat head fish, which is the most economical maintenance

  6
 September 13, 2024
Everyone knows the classic Lu Zun and the three links of the fat head fish must be replaced. After a certain number of years, the heating water pipes will age and leak.
If the car is left overnight and a liquid leakage is found at the left rear wheel, this situation is probably caused by the aging and leakage of the rear heating water pipe.
Replace the original rear heating water pipe, from the front engine to the rear heating water tank. This heating water pipe is very long and very troublesome to replace. Of course, the price is not cheap. Working hours + materials cost at least more than 1,000.
To solve this problem, we have specially made a batch of rear heating water pipes with the same angle as the original factory and the quality is no less than the original factory. It’s very easy to replace, and of course the price is much cheaper.
Not much to say, above picture
When the rear heating water pipes age and leak, they usually leave them overnight, and there will be a pool of oil leakage on the left rear wheel, but there will be no hot car.
If the car is seriously heated, leakage will occur.
Fat-headed fish generally experience aging and leaking of post-heating water pipes after more than five years.

If this car is left overnight, there will be a pool of antifreeze on the ground.
The rear heating water pipe is very long from the three-way part of the engine compartment to the rear heating water tank of the left rear wheel.
Replacing this water pipe requires removing a lot of accessories, which is troublesome.
For such a long water pipe, the original one is also very expensive. Parts + working hours cost at least 1000 yuan.
Customized water pipes *2+ heating water pipes *2+ water pipes clips *4
The above materials can solve the problem.
The material of the water pipes is made of silicone, and the quality is no less than the original material. Match it with the original water pipe connector and find 4 water pipe clips to fix it.

Two heater water pipes + two heater water pipe connectors

The angle of the rear heating water pipe is exactly the same as that of the original car.

The water pipe has a wired layer and the quality is very good.

Original water pipe connections

Matching several water pipe clips
The hose and the overall water pipe of the rear heating water pipe are die-cast in one time, and the die-cast clip needs to be cut with a handbrake wheel.

Disposable die-cast water pipe clip

This part needs to be gently cut with a handbrake wheel
The angle of the replaced heating water pipe is the same as the original one, which can save more than 1,000 yuan.
I hope this maintenance case can help motorists save money and maintain their vehicles more conveniently.