Zhixuan 1.5 Sharp version cleaning throttle, spark plug and other operations
RaeIvan 
7 
More than 47,000 kilometers
Sleeve of Tool 10 for removing spark plug high-pressure pack screws
Sleeve of Tool 14 for removing spark plug
Tool magnet rod is disassembled. Spark plug needs to be taken out with magnet rod
More than 40,000 kilometers of throttle are already very dirty
To clean the throttle, be sure to remove the intake pipe for easy cleaning
Remove together with cover
4 spark plug high-voltage pack
The process of cleaning the throttle was not photographed. Anyway, the cleaning agent was sprayed on the towel to scrub the throttle until it was cleaned completely.
To clean the throttle, you need to turn on the power and need someone to help you step on the accelerator so that the throttle is fully open for cleaning.
Remove 4 screws with 10 sleeves
Unplug the high-voltage pack power plug
Remove the high-pressure bag
The spark plug is inside
Clean the spark plug and let it soak
intake sensor
Clean the intake sensor and install it back
After the throttle valve is cleaned, the intake pipe is installed back. After installation, carefully check whether there are any problems.
After cleaning the throttle valve and intake sensor, the installation was restored and reset. The towel was already very dirty and had to be thrown away.
After cleaning, it is best to blow off the 4 spark plugs with a hair dryer before installing them.
Install everything and carefully check the collection tools
Zhi Xuan is constantly changing and forging ahead
Zhi Xuan replaced the Camry high-pitched speakers last time, and this time he replaced the Camry snail high-pitched speakers again. This is the end of homework. I hope that the forum netizens can refer to and communicate
April 1, 2024
March 27, 2024 
March 27, 2024 
