Lamborghini Mavericks cost seven to eight thousand yuan a maintenance in the 4S store, but this time it is less than two thousand yuan outside.
EleanoreSimon 
13 This time I will bring you the maintenance skills of my Lamborghini Mavericks (changing oil and changing oil filter element). As a top sports car manufacturer, Lamborghini’s response is very expensive and cool. But in the daily driving in order to avoid daily driving failure, the maintenance of this area also have to keep up! Lamborghini 4S is recommended for maintenance once a week or once a year.
If the engine is compared to the heart of the car, then the oil is definitely the blood of the car, and the relationship between the two complement each other. The quality of the oil determines whether the engine can give full play to its full performance.
Automobile oil has the functions of lubrication, sealing, cleaning and heat dissipation, and it is inseparable for car maintenance and maintenance. if you ask what is the impact of not changing the oil, the quality of the lubricating oil will gradually decline due to pollution, oxidation and other reasons, at the same time, there will be some consumption, so that the viscosity of the oil will be reduced, the wateriness will be serious, and it contains a lot of metal debris and gel. Seriously affect the service life and stable operation of the automobile engine, so regular maintenance and change of oil is not harmful.
Use YACCO GALAXIE RS-SAE OW40 for Mavericks. In terms of raw materials, 100% high-purity PAO base oil ensures the best lubrication in extreme environments. The product is built for the high-strength environment of sports cars, and this product is developed for naturally aspirated engines without turbocharging. Mavericks’ ingenuity as a naturally aspirated engine with this oil is the icing on the cake.
Don’t give too much introduction to the rest, lift the car up and get ready to start your homework.
(remove the chassis protection plate and oil discharge screw) because there is a front and rear fuel tank (there is an auxiliary engine fuel tank), remove the front and rear protection plate and oil discharge screw before releasing oil.
The oil in the original oil reserve tank must be cleaned before changing the oil, if it is not cleaned, it will only make up for the amount of oil, because the original oil works under harsh high temperature conditions, which is easy to oxidize and deteriorate, resulting in acidic substances and stacking to synthesize polymer deposits, resulting in damage to lubrication, and some debris will fall off from the friction cylinder wall at high speed, which will also affect the newly added oil. The daily operation of the engine will have a certain impact.
(the original filter element on the left is black and yellow.) the machine filter is hengst machine filter, which is the leader in the construction of complex fluid management module and the design of crankcase ventilation, oil filter fuel filter, air filter and air-conditioning filter, so don’t ask which brand of machine filter to choose, ask is Hengstfilter filter! We’re done.
As for why the filter element should be replaced? When the engine is working, the metal debris produced on the friction surface of the parts, the dust in the atmosphere and the carbon particles produced by incomplete fuel combustion will seep into the engine oil, and the oil itself will also produce gelatinous precipitates due to thermal oxidation. these impurities will be mixed in the oil. If the dirty oil is sent directly to the surface of the moving parts, the mechanical impurities in the oil will become abrasives, accelerate the wear of the parts, and cause oil channel blockage and cementation of piston rings, valves and other parts.
(replace the new filter element)
The function of the oil filter element is to filter most of the impurities in the oil, to keep the oil clean, and to purify the circulating oil before it is sent to the surface of the moving parts. therefore, the oil filter element is also called “the kidney of the engine”. It is an important link to ensure the good lubrication of the friction surface and prolong the service life of the oil.
Change the machine filter and add oil. It must be changing the machine filter to add oil! )
Finally, install the protective plate and screw it up, and the maintenance is considered complete!
That’s all for today’s maintenance sharing. Finally, let’s sum up. In general, the maintenance content of the 4s store is no different from that of the outside. Take Mavericks, for example, a small maintenance in the 4s store should be about 1w. The price of doing the same maintenance in the vice factory is only 70% discount and 60% discount, but the 4s store is expensive for its reasons, ah, what rent, equipment and so on are not small expenses. This is why the price outside is so cheap, so how to choose or have to be screened by the car owners themselves, but it has to be said that the technical level of the construction shop outside is uneven, and you also need to be screened to avoid unnecessary trouble.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
