Watch my Baojun 510 glass lifter replacement

  9
 September 15, 2024
I. Fault description:
The 2017 Baojun 510 Manual Deluxe Edition was purchased at the end of 2017. After buying a car, during the car, it was found that there was abnormal sound when the driver and co-driver’s windows were lifted and lowered. The voice description sounded like something was rubbing and pulling something, and the sound was quite loud. Later, I went to the 4s shop for inspection. There was a problem with the glass lifter and it was in stock, so I simply replaced it directly.

Arriving at the 4s store early in the morning, new Baojun, new atmosphere…
II. Accessories need to be replaced: glass lifter assembly, a pair of main and auxiliary drivers.

SAIC GM Wuling pure parts, original parts, no problems. Use it with peace of mind and worry.

Packaging a plastic foam on the outside of the parts can reduce some transportation losses during transportation.

The glass lifter assembly really looks like a mountain. At first glance, the structure is quite simple.

The original parts all have SAIC GM Wuling logo stamps.

Shop technician, start operating. Talking with the master, he learned that he had replaced the glass lifter many times and replaced it with this one in Northeastern dialect, which is called “holding the handle with the handle”.

The master began to remove the door handle. To replace the glass lifter, you need to remove the interior cover of the door for easy operation. First, remove the cover plate of the door handle, and the master carefully remove it to explain.

Next, remove the cover here. Convenient access to interior cover.

Detail display of door handle. The door handles are all snap. It hurt me to tear it down, but there was no choice. He had a problem. If he had a problem, he had to be treated.

The master was careful, but he still broke several buckles. But it does not affect the use, and the buckle is right. It is recommended to remove accessories with buckles when the weather is hot in summer. Plastic is more likely to break in winter.

Unexpected detail comes. The interior cover has soundproof cotton. Manufacturers are still very conscientious.

For details, the soundproof cotton is still very thick. Give praise to the manufacturers. The door panels are all buckled.

There is also a layer of plastic film inside the door, mainly for dust protection, but not sound insulation.

The master is installing a new glass lifter assembly. Installation is very simple. Just a few screws. Very simple, you can replace it yourself with strong hands-on skills

The anti-collision beam inside the door, like it.

This is a removed glass lifter. It looks quite new.

This is where the problem occurred. There was a problem with the steel wire near the circular groove, which caused the abnormal sound.

Compared with old and new accessories, one is the same, with the same size and quality.

After installation, install the accessories in situ, tighten the screws, stand the plastic sheet back on, and fasten the interior cover. Put all the door handles back in place. Everything is okay.

When replacing the co-pilot, several of the buckles were broken.
Finally, let’s take a look at this glass lifter assembly. The construction is very simple. The abnormal sound was abnormal before, and every time I opened the window, it was very awkward. The sound was very unpleasant and uncomfortable. This replacement is completed, and the abnormal noise is perfectly solved.
Need to remind your friends that the Baojun 510 warranty policy is three years or 60,000 kilometers. If there is a problem with the vehicle, go to the store for inspection as soon as possible. This time it is within the warranty scope and will be replaced free of charge. The above is this sharing, and I have a lot of advice.