[2020] Small P Maintenance Records
Oh, there is also an accidental fault: the cold car ignition does not respond. There is no reaction when turning the key and clicking. It takes two or three times to get on the car smoothly. Because it was an accidental failure, we should observe it for a while and not rush to deal with it.
By the way, the current price of SSSS parts has been reduced to a certain extent, and the main cost is still working hours. Overall, it is still within the acceptable range. So there is no need to talk about SSSS color change. The specific choice depends on the individual.
Small P on the shelves
The master started to open and tear it down
Check the battery and it seems okay. It lasts another year.
The sporadic ignition failure should not be a battery problem.
Hanging front shock absorber dust cover,
left
right
There is no problem with the rear suspension, but the dust cover is also aging and has not broken yet, so let’s just leave it alone.
The whole chassis is complete. The master is removing the guard.
Running the rear wheel of 2W +, ready to switch with the front wheel
The left and right cages are fine
Full synthesis of 6K + in one year
Since there were about 2L left last time, I took two bottles of 1L directly this time. The price of SSSS was 122 per bottle.
As a result, the master said that only one bottle was enough, and the remaining bottle was returned.
Personally, I remember that the oil filling volume of the EA111 should be 3.5L. Didn’t the old oil be drained?
The master said, no, it’s almost done!?
Okay, save some money. If it’s not enough, I’ll buy it later. The EA111 doesn’t burn engine oil.
The starter motor may be the culprit of accidental ignition failure
Oil pan after draining oil + new bolts.
Brand new front suspension dust cover, 19 yuan each.
Front suspension opening and dismantling
The removed front suspension is next to the SSSS special tool, which is used to clamp the spring
Since the front suspension has been removed, why not replace this thing…
Everyone knows what Volkswagen car owners know: flat bearings. The list is called ball bearings, a 99.
It’s been twelve years, but it’s still okay. It sounds a little bit occasionally, but you can’t hear it if you don’t take it seriously.
Stuck spring, replace flat bearing and dust sleeve
A torn dust boot
What it looks like when it’s installed
Old flat bearings and a small half of dust sleeves,
left
right
Change brake fluid,
It actually took 6 years to check, haha, it’s worth it!
One bottle of brake oil is 83, and a total of two bottles are needed.
Nowadays, machines are used to pump oil and fill oil, which is simpler and faster than manual work, and it will not be everywhere.
Brake oil is corrosive to a certain extent and will cause permanent discoloration when it comes into contact with car paint.
There will still be some leakage from one of the branch pumps
Switch front and rear tires
Finally, there is four-wheel positioning,
In the past two years, I feel that running at high speed has turned a little to the left. This time, the front suspension is opened and demolished together.
The master said that there was basically no problem, and the deviation may also be caused by the steering wheel being not aligned enough and the old electro-hydraulic power supply being too heavy.
This time, the main thing is to adjust the front toe…
Finally, there is a detailed data table for four-wheel positioning.
Check out and leave, see you next year
End!