13 change Lang Yi’s elegant demeanor remains the same.
After the car has been driving outside for a long time, due to the adhesion of dust and some other particles in the air, a lot of dirt is often accumulated on the car glass, which affects the driving line of sight to a certain extent.
The dust on the car glass is relatively easy to clean, but if there is an oil film on the car windshield, it will be more difficult for motorists to clean.
The so-called oil film formed on the windshield of a car after driving for a long time usually does not affect the line of sight during the day, but on a rainy day, especially when it passes through the light at night, the oil film will seriously affect the line of sight of the car, so this oil film should be cleaned up in time to ensure the safety of driving.
Generally speaking, we can only wash the car with clean water, but water can’t wash the oil film, so how can we clean the oil film?
We all know to use detergent to wash oil stains on dishes after dinner, because detergent can emulsify oil stains and turn those large oil stains into countless small oil droplets. Then removing the oil film from the windshield is also applicable! Take a look at how to operate it.
Prepare for work, an empty bottle, add water, mix with detergent.
The bottle cap is drilled empty so that it is convenient to spray water.
A bucket and a rag.
First go to the water room to fetch a bucket of water.
Let’s take a picture of the glass before cleaning the oil film.
Because it rained a few days ago, first wash the sand and gravel soil on the car glass to avoid scratching the glass with sand when wiping it later.
Shake the detergent to create foam. It can be sprayed directly on the front windshield. Spray a few more times to fully infiltrate every inch of glass!
Put the wiper up to make it easier to work. Here I would like to say that there is a special working mode of the wiper, because it is not commonly used, I forgot it during the first construction, and then adjusted to the working mode when picking up the wiper, which is very convenient.
How to operate it, please say it again. After the car key is powered on, the power is off, and then the wiper handle is turned down once, and the wiper will automatically run to the working position.
Then pour some detergent on the prepared towels and wipe the whole piece of car glass evenly. The purpose of this is so that the detergent can fully react with the oil film.
Clean up the fallen leaves casually
After waiting for a few minutes, infiltrate the glass oil film.
You can dip the towel in water and clean the glass in a large area. At this time, the water in the bucket is already dirty, indicating that the detergent is effective in removing the oil film. Let’s get another bucket of water.
This time, the clean water will wash the glass again in order to completely remove the detergent residue from the glass.
Watch the wipers wipe.
Try the effect.
Forget it. Just take the wiper off. After all, the glass has been cleaned, and the wiper can’t be dirty.
Arm swings without wipers don’t look good.
While there is still a lot of detergent left, wash the wiper as well.
In this way, the glass and wipers are clean, and a pair of beautiful partners are all washed in vain.
Install the wiper as you take it. By the way, wipe the water stains clean with a towel.
Put it flat to the working position.
At this time, the operation of removing the oil film is complete!
Take the unused detergent home and save it for washing dishes.
In fact, this method is also learned from the car friends’ posts, and the detergent is still very practical, simple and easy to operate.