New pattern small trigger & small tongue
The small trigger that Yan Ban is talking about and the small trigger that I am talking about are both small parts in the car that cannot be missed. The small trigger I am talking about is the small trigger that opens in the center armrest box of the Kia K3 car. It is cold in winter, and the small LD should not be fully opened during one use, causing the small trigger to break. The small LD is called the small trigger, and it is called the small tongue hereinafter. I don’t know if Yan Ban agrees or not. When the tongue breaks, it means that the middle armrest box is always open. If it breaks, it will naturally have to be repaired. When I inquire about the 4S, my God, I actually have to replace the entire armrest box. I steal money. My rice is not blown by the wind. It’s better to change your own uvula. It’s nothing more than moving your own hands. There are many treasures, and there are separate uvula everywhere. In fact, the opening handle of the armrest box of K3 rarely breaks when it is normally opened. I analyzed that most of the reasons are that it was too impatient when opening. When it was not completely separated, I directly lifted the upper cover of the armrest box, and then I heard a crack. The uvula broke.
Small trigger & small tongue contrast old and new photos. This small part is very cheap, which is the price of a sugar dune. A sugar dune is a candied gourd. If Yan Ban sees it, if my explanation is not adequate, please deduct rice as appropriate.
Removal is even easier, and a slightly longer Phillips screwdriver is enough. Since I operated it all alone, dismantling it with one hand and taking photos with the other hand, the appearance of the pictures was a little poor.
The long screwdriver works well here.
This is an image of the small trigger & the small tongue broken inside. Little LD said, and the body was dismembered.
I am a stupid person and have a stupid method. Because of the problem with the limit spring, I have to be careful when disassembling it inside.
Here are several exploded views of the parts that need to be disassembled
Each step is the installation step.
Can you tell that the workmanship of the original car on the left is still more stringent, obviously better than the single small trigger & uvula?
The plastic stick must pass through the limit spring, so that the automatic rebound function can be realized when used.
The picture below shows the pressure plate of the limit spring
Put it on and you’re almost done.
First assemble them and prepare to get on the bus.
There is no way to miss a step.
The small trigger and the small tongue that was dismembered
A glitch solved by a screwdriver.
Small trigger & small tongue took a photo with the screwdriver.
Small trigger & small tongue repair. Throw it away and it will be garbage, and it may still be used after repairing it.
A plastic welding gun was used for backup.
Ben is finished.