Change the wiper strips yourself
WrightFrancis 
8 Change the wiper strips yourself. If you like to do it yourself, you can try it.
A treasure buys a wiper strip. Remove the car wiper.
A treasure buys a wiper strip. Remove the car wiper.
The first is the tools.
It’s basically a pliers, a flat-head screwdriver, a knife or scissors.
tool
The first step is to remove the adhesive strip on the wiper with pliers.
At this time, use a flat-head screwdriver to remove the middle buckle. Remove the plastic strips on both sides in turn. Then follow the picture. Do not move the clips on the most sides.
Then cut off the new adhesive strip according to the size and insert it. First press the plastic strips on both sides of the previous picture.
The next two steps are more arduous and critical. Hold it tightly with pliers first.
Upper middle buckle. Press one side in first, the other side is the most difficult. Use pliers to squeeze again like this. Push it into the card slot.
In the end, it was done.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
