Major maintenance operations
Maintenance items:
1. Replace the oil filter
2. Replace the booster oil and coolant
3. Repair the front brake disc
4. Replace the front and rear brake pads
5. Replace the lower engine bracket
1. Replace the oil filter
2. Replace the booster oil and coolant
3. Repair the front brake disc
4. Replace the front and rear brake pads
5. Replace the lower engine bracket
Inspection before maintenance is indispensable.
Attach the odometer.
Materials required for various maintenance.
Remove the front brake pads and brake discs.
The new brake pads use EBC. The contrast between the old and the new front brake pads is too obvious.
The groove of the front brake disc before repair was also quite deep.
Dedicated for brake disc repair.
The repaired front brake disc.
Carry out the installation work of front brake discs and brake pads.
The rear brake pads are also very worn.
Replace the coolant.
The booster oil is being changed.
Start changing the oil filter.
Fill brake fluid into special equipment.
The equipment connector is connected to each brake cylinder.
Dedicated to replace brake fluid.
Install the wheel with torque wrench.
Finally, carry out cabin maintenance.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024
Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024
You May Like