[2020] Clean the G50 wiper yourself

  5
 September 21, 2024

The G50 has been in operation for more than a year. Compared with when using a new car, the wiper is not as clean as before, and it always feels like it will leave fine water traces.

It is generally recommended for auto repair workers to replace them with a new one if they can’t scrape them clean. I always felt that the scraping strip was not clean, so I decided to clean it over the weekend. If there were any changes, I would continue to use it, and if it didn’t work, I would replace it with a new one.

Due to long-term wind and sun, there is really a lot of dust on the scraping strip.

As Xiaobai, she really didn’t know how to get the wiper. There are no old drivers nearby. Go to Taobao and look for them. The customer service was very enthusiastic and sent a video of taking out the wiper, which was easy to read. Thank you, thank you. We have a collection shop. Please come back if you need it.

The direction of pulling is down the hook. But one thing to pay attention to.

The original G50 wiper has a safety device inside. You have to press and pull again.

Found a shoe brush, squeezed toothpaste, and began to like brushing.

It is indeed dirty.

When pressed against the ground and rubbed against it, there was little foam, making outdoor work very hard.

Look how dirty it is.

Rinse it clean.

If you can take it down, go up if you can. Installation is actually simpler.

Follow the hook, align it and push it up.

The wiper is long and short, so be careful not to turn it upside down when installing it. If the lower swing arms are matched with the shorter ones, and the shorter ones are matched with the longer ones, there will be no mistakes.

Return to the car, start the car, and test the effect. The water mark has been significantly reduced. It seems that it is indeed dirty. It will be fine if you clean it.

Finally, take a beautiful photo of the G50.