Self-reliance and replacing the old 8 front bearing assembly is super simple, and I believe you can do it.
CornellIsaac 
8 First of all, I would like to thank “Smiling Tao Yuan: Lao Ba 40-60 is like flying a plane, replacing the front wheel bearing assembly yourself” for his excellent work and advice!
Lao Eighth in 2007, more than 200,000 kilometers away, began to appear a few days ago. After observing for a few days, it was confirmed that it was the sound of the left front bearing. I just happened to read “Smiling Tao Yuan: Lao Eighth 40-60 is like flying a plane and replacing the front wheel bearing assembly yourself.” The essence of the operation, I was full of confidence, and decided to replace the front bearing assembly yourself. The first tools to prepare: For tire removal tools, a 34mm sleeve (hexagonal depth is about 4 cm), a 13mm sleeve and other sleeves, why should we emphasize the 34mm and 13mm sleeves? Because these two sleeves are difficult to find, we must pay special attention to, let’s look at the pictures step by step:
Park the car well without lifting the roof, use a small and thin tool to pry open the “ABS” cover,
After prying it open, you can see the shaft and the big nut. We want to loosen the big nut from here. It is easier and safer than lifting the roof and removing the big nut after removing the tire.
Specially purchased 34mm large sleeve
It fits in just right and can also highlight the side of the tire for easy disassembly.
This way, but it cannot be removed like this.
In this way, he was still indifferent. The iron rod was bent, but he was still indifferent. For a time, he wanted to give up, but later he found an iron pipe and put it in. There was movement and the screw came loose. This task was completed.
The next step is a series of tasks such as lifting jacks and removing tires, which are skipped here.
After the tire is removed, remove the 2 screws that fix the brake caliper.
After the two screws are removed, there is no need to take out the brake caliper separately. The brake caliper and brake disc are removed together, tied and fixed.
Put it like this
The original bearing assembly can be easily removed after the remaining 3 screws are removed.
Remove this screw, and there are two other screws. You can find them at a glance. This screw is not easy to remove, mainly because ordinary sleeves do not have a 13mm sleeve, so I have to prepare in advance. I just stopped here and ran to buy this 13mm sleeve outside, which delayed my time.
The bearing assembly appears after removal
Don’t throw away the old thing that you have removed. Find a way to replace the bearing yourself, and you will need it in the future.
Newly purchased Delphi, as Smiling Tao Yuan said, the new things are a little tight,
Then I could install it directly after cleaning it up. I also bought the 243 screw glue, but it hasn’t arrived yet. Forget it, it doesn’t matter if I don’t use it. When installing it, pay attention to the white line joint of the new bearing assembly to be installed downward, otherwise the wire is not long enough. I twisted the big nut on the bearing assembly. The triangular plate of the bearing assembly can rotate. I rotated it to align with the 3 screws on the screw hole. I didn’t pay attention at first, but when I installed it, I removed it and reinstalled it, which wasted a lot of time. Relatively speaking, It’s still a little difficult for one person to install this new bearing assembly,
The next thing is to install the brake caliper and brake disc back. I won’t waste any time here. I can install it how to remove it. It’s not difficult. I believe you will. After you finish the test, everything will be normal. Thank you for watching!
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
