[Method] Use pliers to reduce the gap between each joint and the rubber sheet clamp.

2: How to extend the service life of the light bulb

[Method] After buying a car or replacing a new light bulb, wipe the light bulb with alcohol to eliminate fingerprints and oil stains. I did this after buying a car, and not a single light bulb has broken.

3: How to reduce tire noise

[Method] Stick a layer of black felt or flannel to the inner protective plate of the front wheel. Consider carefully that the noise from your tires becomes smaller after the rain and becomes louder after washing the car because of the mud on the inside protective plate

4: How to eliminate the noise caused by uneven wear of individual tires

[Method] After four-wheel positioning and balancing, find a bicycle repair, borrow or buy a wooden file, and file the uneven areas of the tread flat so that it will stop ringing.

5: How to extend the service life of the muffler

[Method] Punch a small hole at the lowest point below the muffler. The reason is simple: drainage and corrosion prevention.

6: How to start and speed up quickly

[Method] When the vehicle is empty or has a small load, you don’t have to worry about damage to the vehicle directly when starting in second gear, because first gear is used.

Gears and clutches are designed under heavy loads, and most cars do not change smoothly from first gear to second gear. After rushing above 3000 rpm, they are quickly pushed into third gear, and then rushing above 3000 rpm. At this time, most cars will fall behind. With you, calmly switch to fourth and fifth gears, or you can directly change to fifth gear (suitable for highway payment), and it does not increase fuel consumption. You might as well give it a try.

7: Simple handling of engine vibration in the morning

[Method] Because individual cylinders are not working well and the valves are not closed strictly, running at high speed is one way (it costs money), or running at high speed in 3rd or 4th gear for a while longer (saving gold), with the same effect. If the hot car does not shake but does not shift smoothly (manual gear),

It may be that the injection volume of the fuel injector is uneven and requires testing and cleaning.

8: How to prevent antenna theft

[Method] Unscrew the antenna, apply strong adhesive to the wire head, and tighten it. The effect is very good.

9: How to brake easily during car inspection

[Method] Just unplug the control wiring harness on the ABS pump, plug it in after finishing, so that it will not affect normal use, and take time to the maintenance station to eliminate the fault code.

Okay, let’s share this first