Non-dismantling cylinder head replacement valve oil seal valve mining Mitsubishi Pajero V6 clinical efficacy is good
EdisonBrowning 
10 In recent years, some older cars have asked me if I could replace the valve oil seals without removing the cylinder head, and some car owners need to dig coal. Two sets of equipment were imported, one set of non-removable valve tools and the other set of walnut sand cleaning machine. I pulled Pajero out of the tree, which had been placed under the tree for several years, and the effect was good. Replacing the valve oil seal and cleaning the carbon deposit are effective, which can solve the problem of cold car starting shake, insufficient power, and high fuel consumption. However, it also requires specific analysis. If it is caused by piston rings or cylinder liners, it still needs to be disassembled and replaced by the engine.
Pajero is a 17-year-old man, with more and less open, and the sludge is still normal
Changing valve oil sealing tools is easy, unlike before, when I used to pull the valve with a thread
After exercising for more than ten years, the hole has become a lot bigger and slightly aging.
Walnut sand cleaning machine, cleaning valve
Without comparison, there will be no harm, and the effect is quite obvious
Like this BMW N52 carbon deposit, hey, if you clean it, the effect should be good
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
