Lingdu glass oil film-cleaning operation
DonnaAugustine 
11 Most car owners must feel troubled when it comes to glass oil films. It doesn’t seem very obvious during the day, especially when there is light at night, the vision will be blurred by the oil film, and the front glass will always feel that it is a little unclear. At this time, we must clear the oil film regularly, so that the glass can maintain a clear vision for a long time.
I accidentally found the feeling of oil film on glass while driving at night, so I found a glass oil film remover from the Internet. The product name has been blocked, and this post does not make any recommendations.
Instructions for use of glass oil film remover
There are actually very few small packages inside, only 100 ml. I personally feel that I can also clean it with soapy water detergent, but I just couldn’t be bothered to blend it, so I bought a bottle to try the effect.
It has a small brush with pictures to make it easy to clean, which is still good.
The size of the brush is about the same size as my Lingdu car model ~
After watching the oil film remover, let’s take a look at the layer of light and shadow when the glass light shines at night.
Since it makes me feel uncomfortable to drive, I must definitely clean it in time and prepare the oil film remover I have bought.
First, wash the car. The glass should not be dirty or dusty, so we should wash the car first before cleaning the oil film.
Clean the front windshield with a high-pressure water gun
After cleaning the glass, wipe the water droplets on the glass clean with a dry cloth, and then apply the oil film remover on the complimentary cleaning cotton.
Apply evenly and circle like wax ~
The effect on the whole glass may not be visible clearly due to the light being photographed.
After applying the entire glass evenly, first rinse the glass with a water gun, and then wipe it with a soft cloth.
It is best to use more force when wiping, so that the oil film remover applied can be wiped more cleanly. Check whether the front cover becomes very bright after wiping.
After the work on the front windshield is completed, the glass in the rearview mirror will also be cleaned off of the oil film
Due to the small area of the mirror glass, cleaning can be simple in three or two minutes.
Now that you have the oil film remover, you must clean all the glass of your car, including the rear windshield.
Still rinse the rear windshield first, and then use a soft cloth to wipe off the water droplets.
Still rinse the rear windshield first, and then use a soft cloth to wipe off the water droplets.
Start “waxing and cleaning” the oil film.
After applying the remover, I used a high-pressure water gun to flush the glass first, so that it would be easier to wipe.
If you are worried that there will be residual oil film remover after wiping, we can wipe all the glass of the car with car washing foam water.
Then use a high-pressure water gun to rinse the glass clean again.
This way there will be no residual white powder.
This way there will be no residual white powder.
The view from the rear windshield from the rearview mirror also became clearer.
A completely new feeling is like waxing ~ Hahaha ~
Another beautiful photo of the front windshield after it is cleaned
The personal vision has become clear, and this cleaning has some effect.
Handsome spicy steamed buns
We cannot avoid the formation of oil films in cars. The only thing we can do is to clean them from time to time. Here, I personally suggest that you can directly use soapy water to clean them. Next time I will use no-cost and ubiquitous soap ~ Give it a try.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
