Replace the front wiper of the Langhang car
AdelaideDolly 
8 I’ve been quite anxious when driving recently. When it rains, the wiper always can’t scrape clean.
The wiper cannot scrape clean, resulting in unclear vision. You can’t get down and clean the car glass while driving.
He secretly made up his mind to replace the wiper with a new one.
I saw that some of the riders changed the wiper strips and some polished the wiper strips…
I directly replaced it with a new one. My eyesight was poor and my skills were not high. I still saved the worry of replacing the original factory in one step.
The wiper cannot scrape clean, resulting in unclear vision. You can’t get down and clean the car glass while driving.
He secretly made up his mind to replace the wiper with a new one.
I saw that some of the riders changed the wiper strips and some polished the wiper strips…
I directly replaced it with a new one. My eyesight was poor and my skills were not high. I still saved the worry of replacing the original factory in one step.
The car was only washed yesterday, so it’s convenient to start replacing the wiper today.
Take out the wiper you bought in 4S and have a packaging bag.
Take it out of the packaging bag and prepare to replace it with a new one.
The new wiper is great. The rubber is soft and neat, and the interface is clean.
The plastics are all new, and the wipers will easily age when exposed to the wind and sun, so they were replaced directly.
The place pointed in the direction of this arrow can be pressed. When changing the wiper blade later, this is the place that stuck the wiper arm.
Let’s replace the driver’s wiper first. When replacing this, a towel should be placed under it.
Prevent the wiper arm from suddenly hitting the car glass.
Prevent the wiper arm from suddenly hitting the car glass.
This square area can be pressed in.
Press it down and you can directly pull out the wiper.
The old wiper strips were already dirty and the surface was uneven.
The two main drivers are put together, one new and the other old, of the same length.
Just take out a new one and plug it in directly.
When the small square pops out, it will be stuck.
Slowly place the main driver’s wiper.
Prepare to replace the co-pilot’s wiper below, and put a towel below to prevent the wiper arm from hitting the glass.
The steps are the same as the main driver.
The co-pilot’s wiper arm was placed on the towel.
Look at the old wiper. It’s very dirty.
When the old and the new are put together, they are the same length.
Insert a new one into the wiper arm and jam it.
When a small square is in place, it is stuck.
Two old wipers have been replaced.
Try a new one. It’s great. There’s no noise from rubbing against the glass.
I sprayed it with glass water, and it was super clean.
The glass water scraped next to the A-pillar, and the scraping was evenly and clearly.
After replacing the wiper, I felt much more at ease and no longer had to worry about blurred vision on rainy days.
After replacing the wiper, I felt much more at ease and no longer had to worry about blurred vision on rainy days.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
