To solve the problem of occasional engine shaking and accelerating shaking, repair the ignition coil yourself, and the fault is perfectly eliminated

  12
 September 24, 2024
The spark plug of an eight-year-old car with more than 60,000 kilometers has not been replaced. When replacing the spark plug myself, the ignition coil rubber sleeve broke due to repeated pulling out of it many times. After installing the spark plug, there was an occasional fire when starting the engine, which caused the engine to occasionally shake and shake when accelerating. I bought a new ignition coil and put it on, but it still shook. Finally, I found out that it was caused by the broken rubber sleeves of two ignition coil. I repaired the ignition coil myself and bought 4 rubber sleeves and accessories from Taobao. Solve the problem of occasional engine shaking and accelerate shaking, and the fault is perfectly eliminated. After repairing, an ignition coil is left for backup.

Bought special tool for pulling spark plugs

Finally pulled it out

Finally, it was pulled out. The spark plug was pulled out many times, causing the spark plug rubber sleeve to break.

Pulling the spark plug multiple times caused the spark plug rubber sleeve to break,

Pulling the spark plug multiple times caused the spark plug rubber sleeve to break,

Install new spark plugs

Ignition coil spark plug rubber sleeve sparks, causing engine shake

Remove the ignition coil and remove the outer rubber ring first

Take off the outer rubber ring first. You can take it like this

Clamp it with pliers and pull out the outer metal sleeve

When the outer metal sleeve is pulled out

The metal sleeve inside is easy to remove, but the rubber sleeve is exposed

When you look carefully, the rubber sleeve has broken

When you look carefully, the rubber sleeve has broken

When you look carefully, the rubber sleeve has broken

Open it and see that the traces of fire are very obvious. It is the fire caused here that caused the engine to shake.