[Daily unpacking] Beijing Chevrolet Cruze car does not move, internal charred and unpacking maintenance

  8
 September 24, 2024
This is a project on gearbox disassembly and repair. Here are different processes for dismantling and repair car gearbox problems. I look forward to everyone’s reading and comments.
The car that came to the store for gearbox repair today was a 2009 1.8L Chevrolet Cruze, equipped with a 6-speed automatic manual transmission (AT). According to the owner’s account, the car did not move, and the inside of the gearbox was burnt for maintenance.

Access to computer detection fault code:

Access to computer detection fault code:

The shelves are being put on the shelves and are being disassembled;

The gearbox is being disassembled;

Removed gearbox;

The engine compartment after the gearbox has been removed;

Worn reverse drum;

Damaged piston;

burnt gearbox oil;

Worn-out steel sheets;

Broken circlip;

worn and burnt friction plates;

Detached friction plates and double-sided drums;

Remove the differential chain;

The valve body is disassembled, repaired and cleaned;

disassembled transmission housing; oil pump base;

disassembled transmission housing;

Assemble and install on shelves;

This gearbox disassembly and maintenance mainly replaced the damaged internal parts, cleaned the gearbox parts, and replaced the gearbox oil. After the assembly was completed; after the master tested the fault, the fault was cleared.
Friendly reminder: When the vehicle is in use, if the vehicle feels frustrated and locks up, in serious cases, it will lead to failures such as not moving, high fuel consumption, and poor shifting quality, which will directly affect traffic safety and threaten the safety of the driver and the passenger. Therefore, during the daily maintenance of the car, the safety issue of the automatic gearbox must not be ignored.