Let’s get the egg first. Jiang Wen’s “Let the Bullets Fly” is a distinctive movie. I personally like this line:
“I only came to Goose City to do three things: fairness, fairness, and fucking fairness.”
Immediately after, Zhang Mazi fired a shot into the air, where violence and fairness were absurdly combined.
There is also the leg connection:
“Leg, what retreat? The pride of the Jianghu, the courage and softness of the intestines.”
“Your legs are my legs, and your life is my life.”
“As the saying goes, there is no way in the Jianghu. With legs, there is a way.”
Okay, let’s get back to business. My 17-year-old SRV recently discovered that there was something wrong with the turn signal on the fender. Although it was produced by the original factory Shanghai Xiaoti, it had been used for many years, the shell was aging, and the amber light was not clear enough, affecting safety.
Turn signal on fender
For the troubled party, this is unacceptable and it will be replaced immediately. Shanghai General Motors has stopped production of this car for N years, and it is difficult to buy the steering lights produced by Shanghai Koite. It was not easy to find one at Ma Yun’s house. He patted his chest and said it was “absolutely pure”. The price was not expensive, so he immediately placed an order and bought a pair. The goods arrived quickly. Compared with the original car, the workmanship looked good. With my more than ten years of experience mixing with a certain treasure, I can’t judge its authenticity. This plate does not study counterfeiting issues.
Bought it at Ma Yun’s house
Then install it, you will encounter trouble when installing it. The clip on the front of this newly purchased lamp won’t catch the fender and will pop out. See the picture below.
The reason is that the newly purchased lamp clip has a manufacturing problem, which is too shallow to stick.
Compare the positions of the original car lights with those of the newly purchased lamp clips. The left picture is the newly purchased one, and the right picture is the original car.
So what should we do? The lights of the original car are aging, and even the lamp sockets are cracked. They are no longer usable at all, and the new lamp clips cannot be stuck.
Upon closer inspection, the clip on the lamp of the original car is still good, and the elasticity is good. Why not try cutting off the original headlight card and sticking it to the new lamp and doing it right away. Use a utility knife to cut off the “legs” of the two lights first. Pay attention to the position to ensure that the old legs can be transplanted to the new lights to better stick the fender.
Due to the small adhesive surface, this plate uses Ergo 5210 from Woolth, which is known as the most powerful quick-drying adhesive. It was glued quickly, as follows.
Above are the original car lights with the legs amputated, and below are the new lights with the legs attached.
After drying for several hours, it was tested. The adhesive points were reliable and the legs were elastic. In this way, the leg transplant was completed.
so-called
“Brother”
“Brother”
“Your legs are my legs, and your life is my life”
Mother of the motherland is very happy on National Day. If you are bored, pass the time. Okay, that’s all right.
![]()
FayLucius 
4 
September 25, 2024 
