[17 Models of Jialu] 11WKM Golf Jialu continues regular self-service maintenance.
MarianWyat 
8 
Practice makes perfect, jack up and brace up.
Pay attention to check whether the ground can support the car body ~~
Pay attention to check whether the ground can support the car body ~~
19MM sleeve removal oil drain screws.
The lower guard plate needs to be completely removed, and a 13mm sleeve is needed to remove 7 screws.
There are also 7 T25 screws on the lower guard plate.
The origin of each screw T25+13mm screw.
The brackets and jacks are worked at the same time.
Cut off one side of the waste oil bucket to catch the waste oil.
In order to prevent waste engine oil from leaking to the ground, wait until the engine oil at the screw port has run out, install the oil screws and then remove the machine for filtering.
JD bought the Lucas machine filter. Affordable price.
Compared with the probability of using it last time, the probability is very different ~
Dafei ratchet wrench serves.
Cover the oil port slightly to avoid spilling it everywhere.
JD bought it from Volkswagen’s original factory.
Pay attention to the difference in numbers, the difference between semi-synthesis and fully synthesis.
We have always believed that JD is self-employed.
Guide it sideways so you can get closer to the fuel inlet.
Not a drop left.
Clean up the venue and prepare to go home.
I bought a piece of soundproof cotton. Fix this lid.
Clean it up.
It looks perfect. Full score for expected results.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
