The big lampshade of the old car was yellowed and renovated. It really worked!

  6
 September 3, 2024
The car is getting older, and the headlight mask has turned yellow. In addition, it has not been washed for four months and it is dirty and yellow. I planned to replace a new domestic mask, but after reading some information, I felt that it was feasible, but I really haven’t had much time to get it in the past few months, and I don’t even have time to wash the car. Finally, I decided to continue using it as long as it didn’t break, and replace it with a new lampshade after it broke. Taobao came across something called headlight retreading liquid. The ingredient is silicon dioxide. More than 20 pieces are free of postage. The video said that the effect is remarkable. It can be used as long as the surface is yellow. Yellowing may be on the surface or on the inside, but it is not certain. However, ultraviolet rays are really powerful, and there is a high possibility of external yellowing, which is probably accompanied by a little internal yellowing. Then get a bottle and try it. Taobao used image search to find it. Free shipping for less than 10 yuan. It’s okay to try it, but the seller will get a refund if it’s invalid. If it is yellowing internally, it will have no effect at all. When the goods arrived, I tried it locally on the surface of the headlight and wiped it with a tissue. After wiping it more than ten times, I found that the tissue was getting yellowed. The lampshade showed that the yellowing was mainly on the surface. When I looked at it during the day the next day, I found that the area where I was wiped was already very transparent and effective. First thoroughly wipe the driver’s side lights, and the effect is obvious when comparing the left and right lights before and after the photo. You need to rub the same part at least 50 times, which requires some arm strength.

A photo on my mobile phone is an advertising poster. I like this front face. Seeing it on the street always shines.

It’s another poster with a bit of a problem with the proportions and a bit flat.

Removal diagram of the front bumper.

Removal diagram of the front bumper.

Headlight removal diagram.

Another headlight removal diagram.

Domestic lampshades are all produced somewhere in the south.

The lampshade is suitable for the old Brey front face Outlander.

Polishing paste is cheap and effective.

A light that was partially wiped a few times, the turn signal part was much more transparent, and the photo could not be seen clearly.

The lamp that had not been wiped was yellow and dirty.

The driver’s side light was completely wiped, but the other light was not wiped. The color difference is not small.

The color is obvious at this angle.

There is a big difference.

Not very bright, the color is yellow.

Rub white tissue to yellow, indicating that the yellow surface gradually falls off.

Both lights have been polished and made much clearer, achieving at least 80% of the effect of the new car.

Recommended Suppliers