Ax4 Replace the left and right brackets on the inside of the bumper_vehicles, vehicles - CNAUTO

RFQ
WhatsApp
Feedback
App

Download CNAUTO App

Scan the QR code to download
TOP

Ax4 Replace the left and right brackets on the inside of the bumper

6

September 3, 2024

After seven years of maintenance, the car was accidentally seen that a hole had been rotten on the left side of the bracket

There’s no hole in the right side. Look, this is pretty serious.

Go online and look at it, it should be that the design problem or the material problem is bad

Googled online how to remove the bumper There is also a bracket installation diagram

arrival Remove and paste with original spare part number and prepare for spraying resin glue

Spray and dry for a few days Spray it once a day

Remove the upper screws first and the upper screws are fine. The one at the bottom is pretty tight

The old ones are ruined when you take them down

The new one is finished. OK

Recommended Suppliers

Hot Information

Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group

JCTSL may turn bus stands into charging points for e-buses

Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja

You May Like

Free App:

CNAUTO

Scan the QR code to download

CNAUTO

Scan the QR code to download

Contacts Us:

Tel：WhatsApp +1 (443) 226-3000

email：service@cnauto.vip

Copyright © 2021-2025涂多多(青岛)跨境电子商务有限公司All Rights Reserved