Rear electric sunshade was successfully repaired

  11
 September 3, 2024
The fixed plastic on both sides of the rear electric sunshade is broken. It is too expensive to replace the assembly. If you don’t replace it, you will feel uncomfortable to have this function. So I learned the maintenance methods of my predecessors in the forum and finally repaired them after experimenting with two kinds of glue

Use a rocker to lift the cover and come down, and then pull it out to come out.

This is the first time I have used 3M glue with a viscosity of CA40. After drying for 24 hours and installation, it lasted for 3 seconds and broke…

Then I chose to use 3M glue with a viscosity of 1500. Perfect repair. Pay attention to repair it with a blade if there is too much glue dripping, otherwise it will easily get stuck and cause severe friction.

It dried for one day. During installation, this black square cover must be installed before covering the repaired link plastic.

Pay attention to lowering it to the bottom when installing.

I have been using it for a week and it is quite strong.