Feixiang has been buying it for 11 years and has no plans to change its car recently. However, it is burning engine oil more and more severely. Burning engine oil is accompanied by a lack of cylinders, accelerating its inability. We have already traveled 245,000 kilometers, and it’s time for a major overhaul.
Taking advantage of the May Day holiday, I found a relative repair shop and did it myself.
Auto Parts City has a holiday on May 1 -3, so let’s go around Taihu Lake first
May 3, opening
Remove it on the third, buy parts on the fourth, clean it in the morning on the fourth, and wait for the parts to be delivered for installation in the afternoon. When disassembled, it was found that the engine was normal before, except for the blocked piston oil ring and burning oil. I bought a whole car cushion, water pump, piston rings, valve oil seals, o-rings on various parts, and small tiles. In order to save some money, the large tiles did not move, and the piston was almost clean after washing for a long time. The total cost of buying parts is 1,600 yuan
The parts arrived in the afternoon, and I found that the piston rings were not original, but seemed to be an improved model. The improved model was okay. While loading, I found that an oil ring was missing. I contacted Auto Parts City and said it would be delivered the next morning. Okay, that’s it on the fourth.
At 8:30 on the fifth, the oil ring arrived as scheduled and continued to install it. When the accident occurred on the fourth, I carefully inspected the piston ring. This overhaul was actually to replace the piston ring. Sure enough, another accident occurred. The air ring was wrong. Contact the seller immediately and ask him how there was an original piston ring in the Taobao store, and what was actually delivered was from this kind of township enterprise? Answer, it’s not easy to find parts now. If you want the original ring, you can only buy the assembly. Okay, then buy the assembly. I will waste half a day of cleaning time. I will immediately drive to the Auto Parts City and pick up the goods from the door.
It was already noon when I bought the piston, and I started working immediately after dinner. The holiday was not long, so I had to hurry up. During this period, my relative and master at the repair shop saw that I had difficulty installing the piston, so he came to give me advice. It was better if I didn’t give me advice. With one advice, the piston ring broke. I immediately went to Auto Parts City. That night, the engine was finally set.
On the 6th, he went to work and finished his morning work. He immediately went over to install accessories. Everything was under control and in an orderly manner. There were no more or less screws, and it was smooth and smooth. In the afternoon, when installing the engine timing side stand, when the screws were tightened, it was found that the cylinder head was slipping. The five screws were at least slightly slippery, and it was not enough for 20 N. The master suggested the screw nut. There is a hardware market nearby. I bought a set for 70 yuan. Fortunately, this small screw nut helped me a lot. Put on the nut and tighten it at 30 N, but don’t dare to tighten it too tightly. It was put on the shelves that night.
On the morning of the 7th, the Freon oil was added, and the exciting moment came. The ignition was fired for three seconds, and the engine’s idling sound was normal. The ignition was fired again and it started immediately. Everything was normal.
A total of about 2500 parts were purchased for this maintenance. I hope I will stop burning engine oil and fight another 200,000 kilometers.
BeckKatte 
8 
September 3, 2024 
