I have been using the car for more than 6 years, and my love for Bo Yue has always been from beginning to end
Since the engine compartment has never been cleaned, the dust inside has become thick
Today, I was suddenly interested because of OCD
After the 4S maintenance was completed, there was a fine engine compartment cleaning and a “general cleaning” was done inside and outside
At first, I was worried about whether washing the engine compartment with water would cause abnormal short circuits in the vehicle
I didn’t realize until the construction started that I used a special cleaning agent, which immediately dispelled my concerns.

All right, cut the chatter and start reading!

[main text]

First of all, the structure of the engine compartment is cumbersome, and some structural corners are sharp, so it is best to wear gloves during construction to prevent scratching your hands.
In fact, theoretically speaking, the engine compartment can be cleaned immediately with water, but if it is not for professional staff, it will easily lead to damage to parts.
Components such as fuse boxes, car computers, and car spark plugs are generally not waterproof. It is best to wash with foam, followed by a slight spray with cleaning solution.

Secondly, do not wash with water when the car is hot. Since water will be volatilized into water vapor, it can easily lead to short circuit failure when penetrating into the machinery and equipment.
Sprinkle foam rinse from a car engine evenly on the surface of the engine compartment, and spray more on areas with too many stains.
After waiting for a while, use a towel to wipe the foam off the surface of the engine compartment.

Once again, after wiping it clean, spray the engine compartment with a professional cleaning solution, and then scrub it cleanly with a towel.

Finally, spray curing agent and surface wax to maintain and polish the engine compartment.