[Golf 6 Sews your own steering wheel cover]

  6
 September 4, 2024

The steering wheel of the original car, which lasted more than 140,000 kilometers, was seriously worn out

I bought an original steering wheel cover and prepared to sew it myself

The packaging looks pretty good

The leather is okay, there is no peculiar smell

Install the tutorial, it’s best to watch the video several times

Record the original steering wheel

Original factory routing

At the back seam, compare the details when the seam is finished

It was difficult to plug the seam on the car, so I decided to remove it and sew it later.

This is a photo of the airbag removed before

This is the fixing screws removed

Fixing screws with anti-loosening glue

After removing the steering wheel

Kind of racing.

The original car leather last memorial

back

Put it in the right position

The edge of the steering wheel sleeve at 6 o’clock is not thinned, so it is difficult to plug, so it is difficult to make it perfect without removing the steering wheel!

The bottom half is sewn up

There is no skipping needle when sewing when the needle is sewn. The original factory is sewn with skipping needle.

It’s done. It can be said to be perfect.

details show

The corners are stuffed in place

Same as the original factory

ready to install

airbag horn

Wiring harness number

ready to get on the bus

The steering wheel is not aimed at the center point because the steering wheel was a little left when driving straight before, so the steering wheel is just right when installed!

Install screws

Installation completed, same as original factory

comparison chart

details

The back seam is tighter than the original one

It’s like driving a new car!

Recommended Suppliers