Summer travel is a must. During the rare summer vacation, you must take your children out for a walk.
Before traveling, it is particularly important to ensure the safety of vehicles. The performance of the car must be ensured in a normal and healthy state.
Recently, I have been feeling that the braking distance is getting longer, and the force and depth of stepping on the brake before red lights have increased. I went to the store for safety reasons.
During the last maintenance, I said that the throttle was a little dirty. This time I went to the store and planned to clean the intake port and the throttle together.
Currently, 4S stores are undergoing renovation, and the fate of many 4S stores across the country is probably the same.
4S store under renovation
![]()
Intake port and throttle cleaning.
The main function of engine intake port cleaning is to clean up carbon deposits and dirt in the intake port. The functions are:
1. Improve the environment of the intake port to make the engine idling more stable.
2. Improve combustion and reduce fuel consumption.
3. Extend the service life of the intake port.
![]()
The function of throttle cleaning is to clean up carbon deposits and dirt inside the throttle.
The function of the throttle is to control the opening and closing of the valve and control the speed of the engine.
If carbon deposits and dirt appear inside the throttle valve, it will cause the throttle valve to fail to open or close normally, thus affecting the performance and efficiency of the engine.
Throttle cleaning can help ensure the normal operation of the engine and improve fuel consumption and acceleration performance.
Drive your car outdoors and use intake manifold cleaner, which is what we often call hanging bottles.
Let the engine idle for more than 20 minutes, and then slam the throttle to clean up carbon deposits and dirt.
Next, the car drove to the workshop for throttle cleaning.
The dirt on the throttle is visible, but it is not as dirty as I expected.
Clean the throttle.
Install the cleaned throttle valve.
![]()
Brake check.
At first I thought the brake pads were getting thinner, but after inspection, they were still very thick!
I said, then check the water content of the brake fluid!
Sure enough, the red light was on and the water content exceeded the standard.
Change brake fluid.
After changing the brake fluid, the maintenance staff also went out on the road with me to test the car.
The sudden braking of ABS made me a little distressed.
The braking problem is solved!
Routine vehicle inspection
Take a sip of the store’s sour plum soup to relieve the heat.
The soaking water truck parked in the store is under maintenance. There has been a lot of rain recently, and it is really heartbreaking for vehicles to soak in water.
![]()
costs
see Figure below
AudreyKennan 
4 
September 5, 2024 
