[Winter Love Song] Lao Ka has a big blood change just for better health!
CarolineOscar 
10 The Corolla at home has been open for a long time. Over the past few years, apart from the wear and tear of tires and batteries, there have really been no worrying problems. Everyone says that Toyota’s three major things are worry-free, but they are really right. Of course, in addition to the car itself, this is also related to the fact that I cherish the car when I use it myself. Every time I go for maintenance, I go through it rain or shine, and I have never missed every maintenance. This time, let’s share with you the process of changing the oil! I hope that everyone will work diligently to help your car take care of its internal maintenance for the health of your car, so that your car will not embarrass you halfway, especially at this time of winter, when the outside of the car is cold and wet., it will make people crazy!![]()
![]()
![]()
Notes:
1. After everything is installed, start the car and look under the car to make sure there are no leaks.
2. Safety must be ensured during the process and safety measures must be taken.
3. Remember to tighten the screws for safety reasons.
Basically, the oil replacement is completed in this way.
Notes:
1. After everything is installed, start the car and look under the car to make sure there are no leaks.
2. Safety must be ensured during the process and safety measures must be taken.
3. Remember to tighten the screws for safety reasons.
Basically, the oil replacement is completed in this way.
Essential tools for oil change
Workers are ready to twist the engine oil draining screws
Once you turn it off, old engine oil will spray out
In order to allow the oil to flow out faster, open the oil inlet cover!
Let the oil flow for a while longer
When the drain is clean, twist the outlet oil screw under the engine
Prepare to add oil
After adding the oil, check under the engine to see if there is any oil leakage!
1. After everything is installed, start the car and look under the car to make sure there are no leaks.
2. Safety must be ensured during the process and safety measures must be taken.
3. Remember to tighten the screws for safety reasons.
2. Safety must be ensured during the process and safety measures must be taken.
3. Remember to tighten the screws for safety reasons.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
