Time flies unwittingly I Boyue has carried out three small maintenance, although each time in the 4S store maintenance when the master to remove the air-conditioning filter to clean, but after the impermanent plum rain season in Guangzhou, is the most likely to breed bacteria, and now it is the height of summer. Vehicle air conditioning should be used every day, in order to ensure good health to ensure that there is fresh air in the car, then the role of air conditioning filter element is very important.
The following is the whole process of changing the filter element of my DIY air conditioner and share it in detail. I hope it will be helpful to the Boyue cyclists in need, and I can also experience the fun of DIY and enjoy a cool summer.
The air conditioning filter elements of most vehicles are hidden in the glove box in front of the co-driver’s position, and then we first open the glove box to clean up the contents, and then officially begin to replace it. The following picture is an open panorama: there is a small light bulb to illuminate, which is good for replacement.
The air conditioning filter elements of most vehicles are hidden in the glove box in front of the co-driver’s position, and then we first open the glove box to clean up the contents, and then officially begin to replace it.
Take the first step now. There will be a fixed position of the buckle on each side. We just need to remove it first.
1 this is the photo on the outside on the right. The arrow indicates that you can push your hand slightly to the inside and remove it inside the armrest box.
A total of 2 carefully saved Oh, note that this is about points! Don’t get mixed up.
Next is the second step, with the help of tool pliers! The arrow indicates that the elastic clasp is flattened in the position, gently forget to pull out the damping bar, and the disassembly is complete.
Phillips screws, 3 removed. After disassembly, remove the protective cover.
This step is the most difficult for beginners to disassemble for the first time! Why? See below to explain to you.
Arrow 1, buckle open and pull out, the angle is about 40 as shown below.
Arrow 2 can be removed by reaching in and buckling it with your hand, or swinging the plastic board up and down.
Take this plastic board to sum up: don’t be timid and cautious, just replace it with a new one if it’s broken.
The air conditioner filter element is finally seen, and there is generally such a piece of paper on the left that can be easily replaced. Just pull it out.
Filtered impurities
Take a look at the old air filter is relatively dark, a closer smell there is a smell of mold.
Install the new air filter and cover it with plastic sheet!
Go straight to the position and retreat to the OK.
First get stuck here, then like this, and finally like this. Do you understand?
Twist the screw and OK it.
Install the clasp on the glove box in a half-open state
If it is installed like this, it will be OK, and only the plastic in the middle can be installed in place.
With a slight click of the arrow here, just click.
Just press it here with a slight push.
A perfect ending.
The installation of air conditioning filter element is over, thank you for your patience!
The filter of automobile air conditioner is a kind of filter specially used for air purification in automobile room, which adopts high efficient adsorption material-activated carbon and filament non-woven cloth and composite activated carbon composite filter cloth. Compact structure can effectively filter various odors of harmful gas of pollen dust. Filter can also effectively filter adsorption particle impurities, to achieve oil filter air purification performance at the same time can effectively remove TVOC, benzene, phenol, ammonia, formaldehyde, xylene, phenylethylene and other organic gases, all kinds of automotive air conditioning filter used as an ideal material, maintenance is recommended in 1W km or once a year replacement.
Bake at high temperature and sterilize, ha
For the health of the family, to develop a good habit, regularly change the air conditioner filter, arrive at the destination a few minutes in advance to turn off the AC button (compressor) to dry the air pipe to reduce bacterial growth, good health and save fuel consumption. It can also prolong the replacement cycle of the air conditioner filter element and reduce the cost of car maintenance.
BradyDewar 
3 
September 9, 2024 
