Used POLO replaced the left front outer cage to solve the problem_vehicles, vehicles

Used POLO replaced the left front outer cage to solve the problem

September 13, 2024

The POLO in 2009 was started in 2015 and has been driving for 5 years. Due to the careful treatment and replacement of many accessories, the car is in good condition. The left front outer cage has long been found to have serious oil leakage, and it has recently taken time to replace it.

Considering the reliability and replacement specifications, this accessory was decided to go to 4S for replacement.

Contact and put it on the shelves.

This is the focus today. The left front outer cage is aging and grease is everywhere.

Remove the wheel.

The brake pads are okay.

The main accessories replaced this time: outer cage + grease.

Loosen the big screw.

Pull off the wheel bearings.

Look at the connection.

Cut off the original fixing clamps before removing the outer cage.

The outer ball head was removed together.

There are inner and outer clamps for fixing the outer cage, both of which need to be cut off.

Empty half shaft.

Put it in a new cage.

Secure the inside clamps.

Then clip into the outer ball head.

Add grease and secure the outer clamps.

Tighten the clamps with special tools.

Both inner and outer clamps are fastened with special tools.

Check to make sure the tightening is in place.

A professional fastening tool is actually a thread tightening device. The original clamp is made of thick workmanship and made of good materials. It cannot be fastened in place with tools such as point-nosed pliers. Therefore, the master said that judging the quality depends on the fastening tool. I can see that there is indeed some truth.

The side is where the threads are tightened.

Then restore the bearings and fix the screws.

Tighten the large nut.

Tighten the screws in place with a torque wrench.

Tighten the large screws in place.

Restore the wheel.

Tighten it in place.

Check to make sure there are no problems and drop off the vehicle.

Leave the workshop and prepare to check out.

Materials cost 180 yuan, working hours are 120 yuan, and I also bought some skin care products myself.

There are not many people who replace this thing, and most masters make it shoddy. It is recommended that it be operated by professionals. After all, it is not as simple and easy to operate as changing the oil.

Recommended Suppliers

Hot Information

Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group

April 1, 2024

JCTSL may turn bus stands into charging points for e-buses

March 27, 2024

Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja

March 27, 2024

Vehicles

Tyre

Auto Spareparts

Material

Const machinery & Agro equipment

Used POLO replaced the left front outer cage to solve the problem