Chase G10 Manual Diesel Elite Edition eliminates maintenance lights on the dashboard_vehicles, vehicles

Chase G10 Manual Diesel Elite Edition eliminates maintenance lights on the dashboard

September 13, 2024

My Dabai turned on the maintenance indicator light as scheduled at more than 25,000 kilometers, which was the small yellow wrench indicator light. Since the 4S shop did not have the black-shell oil I wanted to change, I ran more than a thousand kilometers in five or six days while waiting for oil. I also eliminated the maintenance warning lights in advance.
The maintenance before the Spring Festival was done in advance. A maintenance reminder appeared shortly after driving home. The master in the online store instructed me to clear it. A post was also posted at that time, but it was not very detailed, which led to a car friend sending me private messages, but it couldn’t be eliminated according to my method.
Here are the main points I learned:
[1] Description: Turn the start switch to the second gear ON position, as shown in Figure 3 below. Note that it is not starting the vehicle
[2] Description: The button at the end of the multi-function handle on the left side of the steering wheel is a clear button. You can press and hold it for a long time to clear small mileage or clear maintenance prompts. See Figure 7 below
[3] Operation: Within 2 seconds after turning on the start switch and turning on all the indicators on the instrument panel (as shown in Figure 12 below), press the clear button on the left handle of the steering wheel 5 times quickly and continuously. It doesn’t matter if it exceeds 5 times, but you must press it quickly and continuously.
The above operations have been cleared. This method is only available for vehicles without a large screen display on the driving computer in the G10 manual version.

This time the maintenance light came on at 25000 kilometers

I posted a post in February 2019, but it was not detailed.

Turn the start switch to the ON position

The small yellow wrench light is a maintenance light

Multifunctional handle on the left side of the steering wheel

Clear the button. Press it for a long time to clear the small mileage, and press it for 5 consecutive times to clear the maintenance prompt.

Try clearing small mileage first

Hold on and not let go

The mileage is zero

When turning on the ignition switch in ON gear, press the clear button 5 times quickly and continuously when all the instrument panel indicators are on

These are all the indicators that light up when pressing the key. The maintenance reminder light goes out together after pressing the clear button five times.