Replace the T60 taillights yourself_vehicles, vehicles

Replace the T60 taillights yourself

September 15, 2024

When Dolun was crossing more than 20 days ago, his rescue teammates slipped sideways and hit a tree. Unfortunately, the taillight on the driver’s side died.
Quickly replace new taillights after returning to Beijing
Today, I was working on a business trip in Kulun, and the taillight on the main driver’s side was damaged by the pickup truck of the construction site brother. The taillight on the main driver’s side was sacrificed again.
There is no need to apply for insurance for this kind of small bumps and bumps, and it is easy to replace the parts you buy at Jack Ma’s house.
Ma Yun’s home searches for the keyword “Chase T60 taillights”, and many homes are selling two T60 taillights
I bought and compared the cheaper one with the expensive one with the 190 yuan one.
There is no difference when viewed from the outside, but the metal buckles are different. But it can be replaced with the buckle of the original car.
Both models come with their own light bulbs and cable cables. It’s easy to install and just replace it in place.
I can easily explain this when I take pictures later ~~~

The damaged taillight of Duolunxing

Zoom in and see carefully. The lampshade is broken and the paint is missing. It has to be replaced together to repair the lamp.

Cullen was hit. Why was the taillight injured?
The other party’s attitude was very good. In fact, the construction site was very empty and ran away. No one could be found.
I took the initiative to apologize because my back bar itself was injured, and this collision was nothing compared to it.
The taillights cost 150 yuan, and it’s okay to repair them yourself if you only asked my brother for 150 yuan.

Changing the taillights is easy. Just prepare a plum wrench

When the tailgate plate is opened, there are only two screws that fix the taillight
When you unscrew the light, you can see two snaps on the side that are easy to remove.

I made a string for the taillight
Add wiring harness between original car plug and tail light plug
Remove the steering brake and reverse signal to control the added lights. Use it here. Remember to add diodes to prevent backflow
The advantage of this is that it does not damage the original vehicle wiring harness and is very convenient to replace and repair

There is a snap on the plug that can be easily pulled out when pressed.

Open the new taillight package and enjoy it
Taillights are not as meticulous as headlight workmanship requirements

The top three lines in the picture are the brake lights
At the bottom are the fog lights. Sometimes factory workers will install them in the wrong position. Pay attention to this

Plug the new plug back in as it is

Align the hole and insert it back into it as it is. Remember the two screws on the upper side

Here is the nut buckle that distinguishes good workmanship
If the subsidiary factory’s one is too bad, just remove the original factory’s one and replace it. Save money and solve problems