At the end of the year, ushered in the first insurance day, the mileage did not reach the 5000KM guarantee value, but from the factory nameplate time has the maintenance conditions. During the National Day period, there are few after-sales people, there is no need to make an appointment, it is true that not many car owners do maintenance during the holiday period. There are more owners of new cars than maintenance.
The first maintenance is to use the so-called SL grade original factory white bucket, as well as the oil filter, it costs more to use the full synthesis, it must be used free of charge, the same bus, kilometer after sale feel less, in fact, the reason for changing the instrument, the actual mileage is still more than 3000 kilometers, but the new instrument is only more than 300km. no, no, no.
It has been more than half a year since we bought a car, and the addition of large and small is basically a principle, high-equipped + original factory + practical + beautiful.
After the things added in the last post, I feel that the simple configuration of SKD is really too serious, and many practical things have been reduced. In fact, Xin move can add a lot of practical things to DZ, and the common interface of many things on the PQ platform is powerful, so there is no need to destroy the original car harness.
Item 1: electric heating rearview mirror-the original factory mirror is only electrically adjusted, it is really inconvenient on rainy days, water fog will basically blind your eyes, affecting safety, changing the live heating of the original DZ factory is necessary, with lights left and right, mirror wiring to BCM,20 BCM,20 version is a dual-port BCM integrated gateway, can expand a lot of original factory configuration, or a very strong expansion.
Item 2: front bar high configuration off the net-after the last change of the high configuration medium net, the front bar high configuration net continued to be installed, which had to be removed, and Xin move this net individual felt that the design was an anti-theft design, and it was impossible to remove the grid completely without removing the bars, unless it was destructively dismantled, but the new net could not be installed, so the front bars must be removed, mainly because of reverse clamping.
Item 3: engine cover hydraulic rod-automatic lid lifting must be needed, which can save some effort. After this installation, you need to pay attention to adjust the uneven displacement between the left and right sides of the hood. Most riders still install this.
Item 4: leather steering wheel-20 standard plastic plates from low to high, which are indeed different from leather in texture, but also vary from person to person, and their preferences vary. Feel that the plastic plate should be safe mainly because it won’t slip, and the PQ platform uses a three-card steering wheel. I like to prefer leather, decisively upgrade to GTI red line D steering wheel with airbag, feel really good, with a full set of buttons.
Item 5: gate switch-the original car glass elevator switch is without light, changed with high-equipped belt lamp with plating (connect the wire harness to the headlight switch for unified control, turn on the small light, it is very suitable for driving at night, and the green light turns red.
Item 6: large font instrument-the original instrument is Johnson’s, it is indeed a practical low-end route, the function is relatively single; order a brand new DZ original large font instrument, the backlight automatically adjusts the backlight according to the strong outdoor light this function is really very exotic, and the mobile phone adaptive backlight has the same function, the vehicle information display is much richer and more intuitive than the original Johnson instrument.
Item 7: high gear base-the original factory is not highlight, this time I changed a highlight, the installation is simple, but the clip clip is more troublesome, the plastic frame toughness is very good, not easy to break.
Item 8: direct tire pressure-the original factory is equipped with passive tire pressure, I am afraid the tire is not allowed to light up until the line burst, or a more direct point of view, the domestic DZZG version will not be considered, directly on the DZ import second-generation tire pressure, instrument display intuitive, on the large font instrument can add direct tire pressure display, domestic version can also be external or with external display.
Item 9: rear parking radar-there is no rear parking radar in the low configuration, and there is a reserved hole before the replacement of the high rear lip, so the three radar probes of the original factory rear parking can be ordered directly, and the installation can be completed without removing the rear bar. the buzzer is placed in the left rear frame, the alarm sound is completely unattenuated in the front row, and parking is not afraid of rear obstacles, which is practical.
Project 10:MIB-682E: once again upgraded to the top multimedia system of the PQ platform, the previous Tianbao 187B is idle, friends can contact if they need it, and the 20th version of Xin can be identified directly without a broken line, adding the transfer harness to achieve steering wheel control of 682sound, phone, voice, switching and other functions, super convenient, but manual and CD playback is needed to switch songs and screensavers.
Item 11: micro wiper + constant speed cruise: this configuration is still used as a sports version accessory, replacing the low configuration wiper steering ear, currently there is no increase in constant speed cruise, manual acceleration constant speed cruise is not so sensitive, so give up this function to add, reserve first.
Project 12: upgrade sound-the original factory high configuration is 4 bass, 2 treble, but the sound quality is really general, upgrade 2 European speakers, 2 A-pillar 2-inch treble (series BENNIC filter capacitor), 4 car door bass, 1.5-inch rear door tweeter 2 (old car A-column tweeter capacitor series), a total of 8 speakers, the back door to make a hole, the conventional high-bass up and down the line layout. Perfect with MIB682 direct push, the total power of the loudspeaker is less than 682 output power, without power amplifier, power amplifier is not necessary for A-class car space.
Item 13: the original factory hand-clasp camera-the high-end camera is not the original DZ camera, it is actually a secondary factory part, decisively put on the original factory handle, the hole position needs to be polished a little, perfect solution, connection 682, the image and parking line are accurate, the center layout.
Item 14: (air conditioning panel, headlight up and down adjustment, rearview mirror adjustment, headlight switch) Red light-steering wheel, navigation light beads are all red light, unified light, all green light is changed to red light, Osram green light is dismissed.
Item 15: leather handbrake handle-the original car is made of plastic, upgrade high-equipped leather red thread handle.
Follow-up changes: comfortable leather seat (with rear proportional upside down), rear wheel GTI disc brake
Personally, I feel that there is no need to upgrade non-original parts, such as rain, one-button lift of windows, electric folding rearview mirror, heated seats, xenon lamps, 16-inch high-end wheels, and so on. It is recommended that it should be the original, so as not to cause trouble later.
This time, let’s stop here and look at the picture. Partners who need to be changed can take action.