XC40-Air conditioning filter element and air filter element replacement

  6
 September 16, 2024
Come with the handsome photos first!!

We have some goods on Double Eleven! Generally, the air conditioning filter elements and air filter elements are replaced every 20,000 kilometers! It is best to buy it at the official flagship store!~!
[About purchasing air conditioning filter elements]

With this matching model, be careful to bring activated carbon when buying. Below are pictures of the specific model! LAK 1499

LAK 1499, please pay attention to the model number
Of course, for reference only, you can also go directly to the 4S store to buy and install the original factory.

[Specific operations to replace the air conditioning filter element](No need to remove screws)

1. Open the passenger storage box

2. When you see a bandage buckle on the left and right, hold down the frame column in the picture and pull it up directly. Pay attention to the strength and angle, otherwise the buckle may be damaged. You can buckle the back of the buckle!

3. Find these two picks, gently dial them up, hear the click sound and pull them up at the same time, and the board will be removed.

4. After removing the small board, this is it, two more picks are pulled downwards and outwards at the same time.

5. You can pull it out. There are also leaves. You can also change them frequently!

6. For a new one, please pay attention to the air inlet direction, which is consistent with the original air conditioning filter element placement direction.
With a simple approach to ensure fresh air, Chengdu’s smog is still quite serious and can be changed once a year.

[About purchasing air filter elements]
There are two options. This depends on the individual. The one I chose seems to be cheaper! haha

C24501。Just find the right model and buy it! It is best to start from an official flagship store or formal channels. Air filter elements have an impact on the engine.

LX4821
[Specific operations to replace the air filter element](Screws need to be tightened)

The first thing to do is prepare a tool for screwing: a hexagonal socket Torx screwdriver T25

Pay attention to the model T25. It is not expensive. You can buy it anywhere.

Start tightening the screws, seven screws, still be careful not to fall in! It is best to buy a magnetic screwdriver!!

Remove the screws, lift the cover, and you will see the air filter element.

Compare the old and new, the old one on the right is really dirty!! Then replace it and tighten the screws!!

Done, haha!!

Recommended Suppliers