Line up for more gas and wash the throttle
JeffreyDaniel 
8 The reason why we have to wait in line for refueling is because there is an activity at the gas station, and the discount per liter is 2 yuan or January 6. At that time, I stood in line early in the morning to refuel. After all, it was Monday, and it was early in the morning. Everyone should go to work. There shouldn’t be too many people waiting in line.
Sure enough, you can still see this sign in line here, which is not bad.
I didn’t run all the oil in the tank at that time. After all, I don’t know when the two-yuan discount will end. But the fact is luckily I added it because the two-yuan event was cancelled after two days. )
Although it was blocked by that ice cream cone, it should still be faintly seen that gasoline dropped by 2 yuan per liter.
Although it was blocked by that ice cream cone, it should still be faintly seen that gasoline dropped by 2 yuan per liter.
I took advantage of the low oil price to add a meal to the 4th wife. Fill up with 95 # gasoline. Ha ha ha
The last time we refueled in December was at Sinopec, which also offered a discount of two yuan per liter, but the last time we queued up to finish filling up and left the gas station for almost an hour and a half.
I originally planned to go to the father-in-law’s store to change all the antifreeze. (because I had planned to drive myself to Putuo Mountain at that time. After all, I had also driven Xiao Heilang for four years and ran 68,000 kilometers. I said that the old was not old, and that the new was not new, and I had never changed the antifreeze during the period, so I thought it would be better to change the antifreeze before driving, otherwise I would be afraid of opening it on the highway. Ha ha ha ha. Later, because a job was suddenly arranged at home, I suddenly went to work, completely disrupting my plan for a self-driving outing. Finally, my wife and her best friend went to Putuo Mountain by train, and then washed the throttle on the way. Recently, I feel that the power of the vehicle is a little slow, maybe a little too much carbon accumulation. I’m going to do it together then. As a result, because of the sudden work, the self-driving plan was disrupted, and the things of changing antifreeze and washing the throttle valve had to be delayed first, and then on the first day before I went to work, I asked a friend to go to his store to sit down. I didn’t think about washing the throttle valve in his store at that time, because we didn’t want to bother my buddies. We happened to be chatting, and a man came to ask about the throttle valve, so I said it casually. Just take the detergent and wash it for myself.
My buddy said that when he arrived at his store, he would ask the guests to do it themselves. Let’s leave it to him. Then we can’t do nothing. Let’s open the hood for him, .
Pull the handle, then unlock the second lock on the hood, prop up the hood, and my buddy pulled out the plum blossom screw and began to remove the hood screw (I asked at that time, without an electric screwdriver, isn’t it exhausting? To tell you the truth, I think the electric screwdriver is really convenient. I removed all the screws for you. Maybe the essential reason is that I am too lazy. Don’t want to do it. )
After the engine cover screw has been removed, remove the engine hood and the engine air filter element, because it is afraid that the cleaning agent will be sprayed on the air filter element when it is cleaned later.
After removing the engine air filter element, begin to remove the screws that fix the throttle. Of course, to clean the throttle is to remove the throttle and clean. Several screws are removed. Look at the thick and long screws.
But here is a point to pay attention to. If you do not unplug a wire harness on the throttle before cleaning it yourself, congratulations, ha, because you have to rematch it with a 5053 computer if you unplug it. If you don’t have a 5053 computer, you are advised not to pull the plug, or you may have to call Road Rescue. As a matter of fact, the throttle is really a little dirty.
But here is a point to pay attention to. If you do not unplug a wire harness on the throttle before cleaning it yourself, congratulations, ha, because you have to rematch it with a 5053 computer if you unplug it. If you don’t have a 5053 computer, you are advised not to pull the plug, or you may have to call Road Rescue. As a matter of fact, the throttle is really a little dirty.
Pick up the spray and spray it on the throttle, then brush it with a small toothbrush
Brush it more often. For this spray, of course, it is recommended to clean the throttle properly or to use the regular throttle cleaner. It is not recommended to use the carburetor cleaner as I do.
Spray some more on the throttle, some stubborn stains won’t come off.
We continue to gently press our hands against the throttle and continue to brush with our toothbrushes.
It’s actually a lot cleaner.
Is it more obvious from this point of view?
Here you go. For nothing.
Ignore that little stubborn stain
Ignore that little stubborn stain
To tell you the truth, it is quite clean, and then according to the process of how to disassemble it, how to install it back, it is basically done. My buddy told me that the speed might be a little high after cleaning the throttle. He said there might be white smoke, which he said was normal.
In the end, I ran into a man with a burden on his shoulder to sell this candy cake at the door of the store. it really stuck his teeth. Ha ha ha ha. But it does smell like a child.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
