The test drive was completed at 10:30 on December 25, 2019. I would like to thank you here. Brother Dao Lang, patient guidance, the shop owner got me this car in one day. The fee is as follows.
Aluminum alloy base 650, oil comes with (maintenance has passed 1400 km), thanks to Dao Lang’s steering wheel reset and maintenance hidden function: at the same time press and hold the phone call, and then press the OK key on the left for 3-5 seconds to enter the hiding, directly select the bottom English, and then click on the whole maintenance-confirm completion
Antifreeze is not connected by steel washbasin.Cannot be wasted, man-hour 400 yuan (including the cost of replacing valve chamber cushions and spark plug cushions next time) cushions in the local “some auto parts said Ma Yun invested 1.6 billion” spot factory 120 a spark plug cushion 60, (not that Mercedes-Benz quality control will not be the outflow of the original factory accessories? ) cushions total 360 to be installed tomorrow
A set of cushions for the working hours of the base. Total: 1410

Content of original post:
Recently read all the posts about M271 base maintenance, @ ZZWEN, @ Wollston, especially thanks to “Dao Lang” private patient guidance to share maintenance experience, 20 years of car maintenance hobby, his job is a doctor, about the base there are gaskets and four seals successful, there are failures, the base price is uneven, and finally decided to buy aluminum alloy assembly, but the whole network is out of stock And the strict version said that the quality of the aluminum alloy assembly is poor, is there a small partner who has changed the aluminum alloy assembly? Now I’m going to return the gasket and four sealing rings to try it first, and where do I buy the gasket from the original factory? Does it need to be taken apart and cleaned when the starter is removed? It must be full of oil, about glue, where to buy authentic Toyota sealant? If you start the car after 12 hours of glue, is there any part of the glue that is the front and back of the gasket? Do you need glue around the four sealing rings? The glue can’t be applied to the sealing ring, can it? Play a thin layer! The boss who replied, I wish you a fortune in 2020 and no car repairs in 2020.