National fifth exclusive enjoyment of the first guarantee record post

  6
 September 22, 2024

Pick up the car on September 2nd, it will be three months soon, according to the requirements of the factory, it is time to do the first insurance! To remind you, the first insurance is 3 months or 5000 kilometers, whichever arrives first. The first guarantee can be done at any 4S store with a driving book and maintenance manual.

GM6 is the babysitter car at home, not the usual main car, so it doesn’t run too much, driving more than 2100 kilometers in three months. This is after I found the problem of leaking coolant at the end of October, I specially drove this car.

Two days before I went to the first insurance, it snowed in Beijing. I couldn’t restrain my excitement and took a picture of it as a souvenir. Just on Monday to go to the first insurance, you can wash the car!

On Monday morning, I left for Shoubao. With the experience of the last time I went to 4S, I deliberately went out later this time, because there are traffic restrictions on the bus lanes on the third Ring Road before 9 o’clock, so the third Ring Road after 9 o’clock is much easier to walk. Did you see the outdoor temperature in Beijing shown by the car?

Let’s make it clear, around 09:30 in the morning, when the sun is out and the temperature is 2 degrees. I am satisfied with the fact that GM6’s direct injection turbocharged engine starts smoothly at low temperatures.

There is no traffic jam on the West third Ring Road. Luckily, the temperature has changed to 1.5 degrees. GM6’s outdoor temperature display can be accurate to 0.5 degrees, which is good.

From the North Fifth Ring Road to the South third Ring Road, I traveled halfway through the capital. After 23 kilometers and more than 50 minutes, I finally arrived at the nearest 4S store. Why didn’t GAC open one in the northern region?

This store is the 4S where I carried the car. I also came here last time to deal with the problem of leaking coolant. On the whole, I feel that the craftsmanship and service are quite good and responsible.

There happened to be an empty parking space in front of the after-sales department, so I drove directly over. The last time I was here, there was a guide to park at the door, but I didn’t see anyone today. I guess it was too cold or too busy.

Come in and have a look, sure enough, there are a lot of people in the shop. Maybe it’s because there are a lot of accidents in the store just after it snowed. It took me more than 20 minutes to get in line. The pick-up process is very formal, registering information, checking the vehicle, and protecting the seat and steering wheel. The first insurance is free, and there are not too many projects to be done. The receptionist said that there are many cars to be repaired today and need to wait in line to enter the workshop. It is estimated that the first insurance can be made after lunch. Let me have a rest first and give me lunch coupons later. I looked at the time, and no wonder it was 11:00.

Each after-sales reception table has a small device about oil, and there is a small metal ball in the three original oils, which can be turned upside down to see the fluidity of different oils according to the speed at which the balls fall. I played with it for a while, and it was fun. But the receptionist did not recommend me to increase the money to upgrade the original all-synthetic oil. Even if he did, I would insist on using 5W30 oil, which is cheap, but the viscosity is more suitable!

Waiting for lunch is really boring, I went to the new car sales hall to see Chuanqi’s star model-GS4, this change is very beautiful, this car has a total sales of more than one million, there is indeed a set.

The GS5 looks good, too, and the car doesn’t smell much. Seeing here, I wonder why the sixth version of GS4 and GS5 still use Aixin’s 6AT transmission, while the 6th version of GM6 still uses a dual clutch transmission. It seems that it is not only to consider the emission factor, but also to reduce fuel consumption.

It’s lunchtime and the car hasn’t entered the workshop yet. it looks like it’s really afternoon. I got the lunch voucher. Let’s eat first. Two meat and one vegetarian, the taste is good, but a little cold, it is inevitable, after all, it is winter. BTW: the employees and car owners in the store eat the same food.

After dinner, I came out from the restaurant on the second floor and saw the whole view of the workshop. The floor was neat, the process was regular, and the parking was orderly. And I have the most contact with FAW Toyota, Guangzhou Auto Honda’s 4S difference is not too much, than FAW Audi’s 4S gap, normal, after all, the price difference!

After waiting in the lounge for another half an hour, my car finally entered the workshop. I hurried over to have a look.

By the time I got into the workshop, the car had been lifted. I was pumping oil. I went around to the car and looked at the hidden double exhaust. It was an interesting design.

At the same time, the master is inflating the tires. when lifting the car, the pressure of all four tires is 2.3. Recently, it is cold and the tire pressure has changed to 2.1.

The first guarantee is simple: change the oil, filter, drain screw gasket, and a gasoline additive. I told the technician that I would take the gasoline additive with me and add it myself before the next refueling.

The close-up of the oil screw and machine filter, I did not install the guard plate, the master to do repair and maintenance is very easy to do, but there are always small animals to patronize me is also a little worried.

The bottom of the cabin is relatively clean as a whole, and it is inevitable to throw in some muddy water when driving in rainy and snowy weather.

After putting the oil and changing the oil filter element, drop the car, take off the engine decoration cover and prepare to pour in the oil.

It’s getting cold, and I see the footprints of many small animals.

Pour in the oil. I remember that the fuel injection port of the engine is very small. This master has good skills. Go over and have a look.

Ha, so that’s it.

This homemade funnel is interesting! As can be seen in the picture, the oil filling port of this machine is too small.

There are a lot of small paw marks in the cabin, freaking out.
I noticed that the capacity of a barrel of oil was 4.5 liters, and the master almost poured it into it. I will observe the height of the liquid level in future use, and if I find that too much oil is added, I will consider pulling out some of it.

The master checked the voltage of the battery, the liquid level and freezing point of the coolant, and the capacity of the glass water. Because of the problem of supercoolant leakage a month ago, the cooling and circulation system was emphatically checked, and some original coolant was replenished.

Finally, the master cleaned up the sundries in the engine cabin with compressed air. At this point, all the work of the first insurance has been completed.

After the work ~ my car is out, the delivery process is very simple, the first guarantee does not have any fees, just sign and confirm it. I can’t wash the car in the shop. I was given a car wash coupon. Just go to the nearby cooperative car wash.

When I came out of the store, the mileage was 2198. I cleared my long-term memory so that I could calculate the fuel consumption after the first insurance.

After checking the tire pressure, it seems that the air pressure of 4S is a little high. Let’s run and see, it’s cold, it won’t take long for the tire pressure to come down.

Waiting in line to wash the car.
All the work of the first maintenance has been completed, and the first maintenance of the GM6 has been recorded three months since it arrived.
Summary:
1. After three months, I feel that this car is good. Overall, I am very satisfied, especially Aisin’s 6AT, which is very smooth and very comfortable.
2. The service and technology of GAC Beijing Changrui 4S Store are very good. In terms of car viewing, car picking, warranty and maintenance, the performance has been very good in recent dealings!
3. Through consultation, I learned that the oil, machine filter and working hours used for GM6 maintenance are not expensive, and it is very affordable to maintain.
4.7 Some software versions of the GM6 shipped before September are relatively old. If you go to 4S, remember to ask the store if you need to make a free software upgrade.
Finally, thank you to all friends for watching! I wish you all happy!