[Daily unpacking] Beijing Dongfeng popular SX6 car is stuck in gear and does not walk through unpacking for maintenance

  5
 September 23, 2024
This is a project on gearbox disassembly and repair. Here are different processes for dismantling and repair car gearbox problems. I look forward to everyone’s reading and comments.
The car that came to the store to repair the gearbox today was a 2016 Dongfeng Popular SX6 car with a displacement of 1.6L and equipped with an infinitely variable transmission (CVT). According to the owner, the number of kilometers traveled has reached nearly 100,000 kilometers, and it is in gear and does not move. phenomenon.

Access to computer detection fault code:

Put it on the shelf and prepare to remove the gearbox;

Gearbox position;

Removing the gearbox;

On the shelves;

The maintenance master is dismantling the gearbox

The maintenance master is separating the gearbox and preparing to remove it;

Dismounted gearbox;(ready to be disassembled)

disassembled gearbox;

Broken chain iron filings;

disassembled gearbox parts;

Damaged gears;

Damaged internal parts of the gearbox;

Falling chain parts;

Damaged chain cylinder group;

disassembled transmission housing;

Removed valve body electromechanical;

This gearbox disassembly and maintenance mainly replaced the internal chain cylinder chain group, cleaned and repaired the valve body, replaced the gearbox oil, and cleaned the internal parts. After the assembly was completed; after the master tested it, the fault was cleared.
Friendly reminder: When the vehicle is in use, if the vehicle feels frustrated and locks up, in serious cases, it will lead to failures such as not moving, high fuel consumption, and poor shifting quality, which will directly affect traffic safety and threaten the safety of the driver and the passenger. Therefore, during the daily maintenance of the car, the safety issue of the automatic gearbox must not be ignored.

Recommended Suppliers