Land Rover Freelander II Replacement Belt Assembly_vehicles, vehicles

Land Rover Freelander II Replacement Belt Assembly

September 23, 2024

The engine belt is an important part of the vehicle’s engine operating system. It is generally replaced for 60,000 to 100,000 kilometers. It is replaced by detecting whether the belt is fatigued and cracking and whether the belt pulley has abnormal sound. During maintenance of the Freelander 2 vehicle, the maintenance technician checked that the belt had cracked and had to be replaced. The belt, tensioner and rudder wheel both belong to the belt set, and all the belt set wheels needed to be replaced due to abnormal noises.
This time, the belt components are replaced for the vehicle, and the original parts of the same model are used to ensure the quality of the original vehicle and are more secure.

What will happen if the belt breaks? If it is very dangerous while driving, the first thing is that all belt drive systems stop working, the generator does not generate electricity, the booster pump does not work, and the direction cannot be turned. It is very dangerous if you are catching up with lane changes, turning, etc. while driving at high speed.

The vehicle arrived at the store and was ready to start inspection. This vehicle was a 10-year-old Freelander 2 gasoline 3.2 displacement model.

Open the machine cover for inspection

The belt has developed serious cracks, and if it breaks during driving, it will have a great impact

First, the maintenance technician checked and found that the belt was severely cracked. He further removed the battery and checked

Remove the attachments around the belt

It’s all disassembled

As shown in the picture, we need to replace the belt assembly

Compared with the old and the new, the engine belt uses the crankshaft pulley to output power to drive the generator, air conditioning compressor, booster pump, idler pulley, and tensioner pulley, and uses the belt to drive other components to operate. Whether it needs to be replaced can be seen with your eyes. When there are many small cracks on the side of the belt that contacts the pulley, it means that its life is approaching and it needs to be replaced.

By checking the content of the components that need to be replaced

Comparison of drive pulleys

Comparison between old and new tensioning rollers

Comparison of old and new idler gears

start the installation

replacement is completed

After installation, the engine test runs normally and the abnormal sound is eliminated.

For more information on the repair, maintenance, upgrades and modifications of Land Rover’s original factory, please pay attention to the continuous updates of Aika Automobile’s “Beijing Tuogu Hongyan”!

Recommended Suppliers

Hot Information

Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group

April 1, 2024

JCTSL may turn bus stands into charging points for e-buses

March 27, 2024

Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja

March 27, 2024

Vehicles

Tyre

Auto Spareparts

Material

Const machinery & Agro equipment

Land Rover Freelander II Replacement Belt Assembly