2015 Buick Angkor 28T Deluxe Edition All Car Brake Pad Replacement Job Sheet
LauraLawson 
7 Checked on the Internet, it seems that we have not seen about the replacement of the brake pads of this car post. Send out my change homework today for your reference.
My family has known for nearly 5 years today and has run more than 100000 kilometers. I looked up all kinds of brake pad information before the Spring Festival, and finally decided to replace it with a ceramic piece of golden unicorn. The time before the festival was too tight, so it was not changed, and the replacement was delayed because of the epidemic after the festival. The car was maintained two days ago, and the 4S store was next to the auto parts city.
Due to lack of experience, I went a little wrong. So the post is also for the convenience of all cyclists, so as not to change the brake pads for a long time, just like me. Let’s start with a specific explanation for you.
The moderator set up an essence for you.![]()
My family has known for nearly 5 years today and has run more than 100000 kilometers. I looked up all kinds of brake pad information before the Spring Festival, and finally decided to replace it with a ceramic piece of golden unicorn. The time before the festival was too tight, so it was not changed, and the replacement was delayed because of the epidemic after the festival. The car was maintained two days ago, and the 4S store was next to the auto parts city.
Due to lack of experience, I went a little wrong. So the post is also for the convenience of all cyclists, so as not to change the brake pads for a long time, just like me. Let’s start with a specific explanation for you.
The moderator set up an essence for you.
This is the gold Kirin brake pad bought on a certain treasure, also known as Jin Qi. It is rumored that the ceramic piece has a good durable brake effect, but it is a little wasted. I do not know if this is really the case. Anyway, after changing it, I feel that all aspects are good. There is no phenomenon that the new film will squeak occasionally, and the foot feeling is also along with the brake and is not deliberately stepping on it. I am more satisfied.
Anterior film
Back film.
Here, it needs to be specially explained. During the installation, the installer repeatedly confirmed whether the electronic handbrake can be matched. The store confirmed that there was equipment that could be matched. The full installation cost was 200 yuan, and a discount of 180 yuan was agreed. And then the story begins. The replacement of the front brake is very simple, directly disassembling and assembling OK. After the film, the boss began to use the machine to match for the rear brake for electronic release, the result. Repeatedly tried, and borrowed a variety of equipment from other stores to try, no, very strange, I do not know why, and then the boss checked online, told me that this car does not need to do electronic matching, just disassemble and assemble it. I’m sweaty. All right, we’ve come this far, so let’s open it.
Go on, all right. To say, I am really bad at this point. It took a long time to take it down, and when the little master put it on, he found that there was a problem. The size was wrong. I was dizzy. For the new film, the card head part of the installation is a little small, and the master said that it can also be installed hard, but there will be a strange noise when it is used. When the former film was installed just now, it was also found to be a little small, so I thought this kind of film was like this. no, no, no.
I said no, take it down and I’ll take a look at it. As a result, look at this front film, what’s the difference on your head? Dizzy, if it really makes do with it, what may happen? it’s scary to think about it. no, no, no.
The top is the old film, the bottom of the new film, just look at this shape is completely wrong, the store must have sent the wrong goods. Really terrible, the key is that I bought this thing years ago, ah, it has been a few months, people still admit it or not?
The structure of the rivets above are all different. Must have sent the wrong model.
Fortunately, the original film of our car is authentic. As you can see, the thickness of this old film is at least 6-7MM at present, and it is no problem to run another 10-20 thousand kilometers. So, after tossing about for 2-3 hours, I put the old film back. Dizzy. The owner of the installation store is also really good, although tossed around for a long time, and finally did not pretend to be new, but also put the old one back, also confiscated my money, like a.
The look of an old movie. After that, when I got home, I tried to contact the seller. Unexpectedly, the seller was also very happy and asked me to take pictures of the frame number and the wheels. After confirming it again and again, he said that he would send me a new one again, as long as I took a new order again and made a note. After receiving the goods, the installation confirmed that there was no problem, and then the new order was returned, and the previous wrong model was sent back.
After that, after the arrival of the newly delivered goods, I went to a car repair shop in front of my house to install it and asked the price. The boss said, because it is an electronic handbrake, the rear wheel is a little more complicated, the front wheel is 50 yuan, and the rear wheel is 50 yuan, a total of 100 yuan. Oh, it’s even cheaper than before.
If you look at this picture again, you can see that the style of this old film is almost the same as that of the new film, even the rivet position is the same, and the connector of the head is the same size. no, no, no. Now I’m relieved.
It is also compared longitudinally. It’s exactly the same size.
Did not pay attention to the front brake change, the little master quickly changed, patronized to pick stones for the tire, did not take a picture. This picture was taken when the rear wheel was replaced.
The technique of replacing the rear brake is really different from that before, even using a battery. no, no, no.
How to operate the film can not be heard inside, there are sizzling electronic handbrake open and close all kinds of sound. It was done in a couple of times, and the rear brake was soon replaced. Then I chatted with the boss for a while to know that their operation is the sub-pump of the electronic handbrake directly powered on by the battery, which can be separated directly, which is faster and more convenient than through the equipment, and they often replace this kind of car with electronic handbrake. So I’m more experienced. This store specializes in specializing in Big Ben, Land Rover, BMW, Audi and so on, so I think it should be reliable for him to say so.
In addition, I have to say again, the original piece of this car is really durable. If you take a look at the photos below, the thickness of the old film behind the brake is at least 7-8MM thick. It’s so useful.
In addition, I have to say again, the original piece of this car is really durable. If you take a look at the photos below, the thickness of the old film behind the brake is at least 7-8MM thick. It’s so useful.
OK, at this point, the whole process of replacement is basically completed. The key points are these points, friends, please remember:
1. When buying brake pads, be sure to double-check the size with the shopkeeper. It is best to send the frame number (the small number and letter at the front of the driver’s window) and the appearance of the tire to the shopkeeper, so as to avoid my previous situation.
2. Confirm whether the installation store can do electronic matching, indicating that it is an electronic handbrake, which is generally understood. Of course, it’s best to buy a package of brake pads to install, so it can save money.
3. Try to find a large professional auto repair shop for installation, even if the cost is a little higher, at least people have more experience and know how to deal with problems that may arise.
Finally, we urge everyone to check the brake pads and brake lines in time (a common fault of this car).
1. When buying brake pads, be sure to double-check the size with the shopkeeper. It is best to send the frame number (the small number and letter at the front of the driver’s window) and the appearance of the tire to the shopkeeper, so as to avoid my previous situation.
2. Confirm whether the installation store can do electronic matching, indicating that it is an electronic handbrake, which is generally understood. Of course, it’s best to buy a package of brake pads to install, so it can save money.
3. Try to find a large professional auto repair shop for installation, even if the cost is a little higher, at least people have more experience and know how to deal with problems that may arise.
Finally, we urge everyone to check the brake pads and brake lines in time (a common fault of this car).
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
