Wipers are used too often in summer. The weather changes frequently and the number of rainy days increases. The demand for wipers will greatly increase, which will lead to wear and tear of wipers. Also, on sunny days, due to the high temperature, wipers are also prone to aging, so the maintenance and replacement of wipers are also essential. The daily method of checking the wiper is very simple. Spray out some cleaning solution, start the wiper, pay attention to whether it moves smoothly, and listen for if there is a loud sound. If there is, it means that the wiper is pressing too hard on the glass. Make appropriate adjustments. After the wiper has swept one or two times, check to see if there is any moisture left on the windshield, and then observe whether there will be any scratches. If the scratches are obvious, it means that the wiper on the wiper has aged. It needs to be replaced. Generally, the replacement cycle of the wiper wipers is one year, and you can also flexibly control it according to your own situation. I just replaced mine myself. After all, it’s not too difficult. I bought the wiper blade at a certain treasure, and I just happened to have time to study it myself and replace it.
The first step to replace the wiper is to stand the wiper first. Isn’t it easy?
I want to take a picture from the side. Isn’t it very interesting? It has a strong sporty atmosphere.
This is a newly bought wiper blade. Let’s take a photo first. The new one looks good
This is the previous one. The wiper strips have aged and are about to fall off after being exposed to the sun. If they are not replaced, they will cause damage to the glass.
You can see that the wiper strip is cracked without pulling it with your hands
The first step is to open the small cover on the wiper blade, as shown in the picture.
After the small cover is opened, pull down and the wiper blade will separate from the wiper holder, as shown in the picture.
After the first two steps, the wiper blade comes off. Isn’t it very simple as shown in the picture?
Compare the old one with the new one, and the size is the same
This is a new wiper blade. The same step as the replacement step is to open the small cover of the wiper blade first.
The wiper blade and wiper holder fit perfectly
Put the small cover on and complete the replacement. The other wiper blade replacement step is the same as the first one. Just repeat the previous step. Don’t forget to remove the protection of the adhesive tape after replacing it. After replacing it, I took some partial pictures of my car. Please enjoy it…
The headlight assembly has Baojun Pinyin letters, which looks so big
Foldable, heatable, and LED turn signal
Combination headlights look relatively simple, but they are not lacking in beauty
Okay, that’s all for replacing the wiper blades. Please understand if there are any shortcomings. After all, you are not a professional.
CarolineWarner 
6 
September 25, 2024 
