Replace the coarse filter screen of BMW 2014 5 Series F18 blower
9 
July 30, 2024 directory
- Use point-nosed pliers to remove three plastic screws, the three red circles in the picture.
- Remove the three screws as follows. It is easier to remove by lifting the middle small head.
- Pull out the wire and fixing clip, and use T25 plum blossom to remove a screw, as shown in the red line in the picture.
- There are three clips in the following red line.
- Place the cover aside.
- Use a 15-socket to remove the screws on one side of the connecting rod, loosen the other side, and place the connecting rod aside.
- Start taking out the fan housing, and use T25 plumx to take out 4 screws, such as the red line position.
- Finally change the filter. The picture below is borrowed from the Internet. If there is any infringement, please inform me to delete it.
Tools used: T25 plum blossom, 15 sleeve, point-nosed pliers.
Use point-nosed pliers to remove three plastic screws, the three red circles in the picture.
Remove the three screws as follows. It is easier to remove by lifting the middle small head.
Pull out the wire and fixing clip, and use T25 plum blossom to remove a screw, as shown in the red line in the picture.
There are three clips in the following red line.
Place the cover aside.
Use a 15-socket to remove the screws on one side of the connecting rod, loosen the other side, and place the connecting rod aside.
Start taking out the fan housing, and use T25 plumx to take out 4 screws, such as the red line position.
Finally change the filter. The picture below is borrowed from the Internet. If there is any infringement, please inform me to delete it.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
