Comparison between PEA (FL-1000) and T-6538 on the dissolution of carbon deposits
TessHuggins 
11 The first is the two bottles purchased at a certain treasure that were most discussed in the forum. They are PEA filled with gasoline and T-6538 filled with engine oil.
Two bottles of carbon removal solution and two spark plugs with serious carbon deposition
To distinguish, T-6538 uses paper cups and PEA uses plastic cups
Write T-6538 and never forget it.
The same is done until the carbon deposit part of the spark plug is just flooded
Filling completed
Write down the current time
Start time October 26 at 3:40 pm
The test is done by standing in a lightless carton
It is now 7:50 pm on October 26
It’s been 4 hours since the raise, let’s see how it’s going now
After filling without light, let it stand for 4 hours
At present, visual inspection shows that T-6538 has better effects than PEA.
PEA after 26 hours
T-6538 after 26 hours
The above two photos are both exposed photos, and it seems that there are more carbon deposits dissolved in PEA.
PEA is much more fluid, and T-6538 has a relatively thick texture.
PEA is much more fluid, and T-6538 has a relatively thick texture.
This is T-6538 Effect after 5 days
This is the effect of PEA 5 days later
I placed it obliquely in the cup. I don’t know why only the upper section was cleaned, but the lower section was not cleaned. Can you explain it?
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
