Owner Share–Replacement of ATE TYP200 brake fluid and in-depth maintenance of brake system
Catalogue
- — Product display
- The trunk is full of replacement equipment!
- — go to the repair shop and start!
- Original brake discs and brake pads OEM brand
- Cleaning and maintenance of hub flange shaft head
- — cleaning and lubrication of guide pin of sub-pump
- — cleaning and silencing of brake pads
- — cleaning of caliper slots
- — Shaft head maintenance
- — finally, change the brake oil.
- — Measurement of somatosensory sensation on board
- — Summary
- Do-it-yourself DIY, enjoy the sense of achievement, happy!
I have come to hand in my homework today. There is always a strange sound on the brakes recently. Take advantage of the 618 event to buy the legendary civil top parameter DOT4 brake oil ATE TYP200 to feel it. At the same time, use the brake system in-depth maintenance set to do a big health care for the brake system. After all, the brake is about safety!
I have never known what brand ATE is before, but I only recently learned that it is the brand of Continental Group, which is the parent company of German Horse tires we are familiar with.
After watching some lateral tests of the physical and chemical properties of brake oil, the dry boiling point of ATE TYP200 can reach 280 ℃ and the wet boiling point is 198 ℃. The parameters are really beautiful. I chose to try!
— Product display
The trunk is full of replacement equipment!
— go to the repair shop and start!
Original brake discs and brake pads OEM brand
Cleaning and maintenance of hub flange shaft head
— cleaning and lubrication of guide pin of sub-pump
— cleaning and silencing of brake pads
— cleaning of caliper slots
— Shaft head maintenance
— finally, change the brake oil.
② brake oil replacement the most important thing is to thoroughly drain the air, otherwise the front foot feeling will be very soft, do not blame the brake oil problem, often is the air is not clean, brake oil will not be compressed, and the air will be compressed!
③ I just changed the ATE TYP200 for the first time, and the foot feeling of the front part of the brake is too soft, so it is not as good as the original factory? Later, after the store emptied for me for the second time, the foot feeling of the front part of the brake came back, very linear, better than the original factory!
If ④ wants to have more sensitive brake feet, it needs to change the brake steel throat and upgrade the brake pads, the foot feeling will be better!
— Measurement of somatosensory sensation on board
The abnormal brake noise which has been perplexing for a long time has not come off, the brake has also become sensitive, and the foot feeling is really much better!
— Summary
My share is for your reference only, and? Representatives must change, everyone’s car condition and the concept of owning a car are different, depending on their own situation!
I am just a car owner, not a businessman, not an advertisement, just share my mind process with everyone in the forum!
Friends who have questions can also leave messages or personal messages. I will answer them all. In addition, there are modified car friends who can join.
Like friends, like, leave a message, thank you, steal time, it is not easy to write a post !