How to choose invisible car and clothing? The market for car film is very deep, so if you want to paste cars and clothes, you must compare the goods and then paste them! Let’s use my experience to tell you how to choose:
First: the choice of membrane. First of all, we should choose the membrane made of TPU material, but it is not recommended to choose the membrane made of PVC material. TPU is thermoplastic polyurethane, TPU film is basically with automatic repair ability, the material is much better, the later period will not drop glue, and the anti-yellowing ability is relatively strong; PVC is polyvinyl chloride, PVC material is not with automatic repair function, later film will appear a large number of scratches, yellowing ability is very poor, time yellowing is very serious! And there will be glue drop! In addition, recently, there has been a TPH film, which is not recommended to be pasted. My friend’s is that it turned yellow after half a year of posting this brand, and there is still a feeling of piece by piece after tearing it off. Now it is not obediently tore off and re-pasted a film of other brands. In fact, if the film is good or not, if you compare it with several other brands, the toughness of the good film will be very good, and it will bounce back after pulling. On the contrary, the bad film will feel hard. It’s not elastic! TPU films can be compared from these parameters: whether imported from the United States, thickness, electronic warranty, toughness, warranty time, anti-yellowing. Now the basic paste is to paste the film imported from the United States, the general thickness can choose 8.5mil, 10 years of electronic warranty, double-coated TPU material, with oily strokes can be erased (or let businesses use chemical cleaner spray to see the effect).
Second: the choice of stores. To choose a store with dust-free airtight workshop (with dust reduction equipment), so that the effect of paste can reduce the dust to a minimum!
Third: look at the construction technology. The technology depends on whether the film they paste is all wrapped and processed. At present, many stores post it along the edge, which is very bad. It is easy to get dirty and white after a long time, and it is also easy to get warped.
.
.
..
..
….
…
…
…. Next, I use my rookie 530 to give you an homework sticker (posted by Johnson’s Jiang Sen film 13800).

Conclusion: the brightness of the white car does not increase much after it is pasted, but it will still be a little brighter than before; technically, the sticker is basically invisible, and the details of the wrapping are good; the only dissatisfaction is not sending me a few more care.