Q
how to reset check engine light chevy traverse
I'm a seasoned industrial engineer with a keen interest in machine learning. Here to share insights on latest industry trends.
Here are the steps to reset the check engine light on your Chevy Traverse:
Method 1: Using a Code Reader
1. Plug the code reader into the vehicle’s OBD port, typically located under the driver’s side dash.
2. Follow the prompts on the code reader’s screen to erase codes. The exact instructions will vary by the model of your code reader.
Method 2: Disconnecting the Battery
1. Open the vehicle hood.
2. Find the battery, usually on either side of the car’s frame. The battery will have a black (negative) and red (positive) terminal.
3. Disconnect the negative terminal from the battery.
4. Leave the battery disconnected for at least 10 minutes. This will allow the vehicle’s computer to reset itself.
5. Reconnect the negative terminal to the battery.
6. Start the vehicle. The check engine light should be off.
Please note: The check engine light is an indicator of an issue with your vehicle. If the underlying problem isn't solved, the light is likely to come back on. So, it's recommended to diagnose and fix the problem rather than just resetting the light.
Just a reminder, disconnecting the battery may reset the vehicle radio, clock, and other memory-based functions. Another important thing to keep in mind is that some newer model vehicles have a backup power supply that will keep providing energy to the computer even if the battery is disconnected. You should consult your owner’s manual for the safest method to reset your vehicle’s check engine light.
Method 1: Using a Code Reader
1. Plug the code reader into the vehicle’s OBD port, typically located under the driver’s side dash.
2. Follow the prompts on the code reader’s screen to erase codes. The exact instructions will vary by the model of your code reader.
Method 2: Disconnecting the Battery
1. Open the vehicle hood.
2. Find the battery, usually on either side of the car’s frame. The battery will have a black (negative) and red (positive) terminal.
3. Disconnect the negative terminal from the battery.
4. Leave the battery disconnected for at least 10 minutes. This will allow the vehicle’s computer to reset itself.
5. Reconnect the negative terminal to the battery.
6. Start the vehicle. The check engine light should be off.
Please note: The check engine light is an indicator of an issue with your vehicle. If the underlying problem isn't solved, the light is likely to come back on. So, it's recommended to diagnose and fix the problem rather than just resetting the light.
Just a reminder, disconnecting the battery may reset the vehicle radio, clock, and other memory-based functions. Another important thing to keep in mind is that some newer model vehicles have a backup power supply that will keep providing energy to the computer even if the battery is disconnected. You should consult your owner’s manual for the safest method to reset your vehicle’s check engine light.
You May Like
You May Like
Q&A
- •what is engine control unit
- •what happens if i put diesel in a gas engine
- •what engine does williams f1 use
- •how to identify a small block chevy engine
- •What is the displacement of the engine of a Formula One car?
Popular Information
- •Volkswagen, Mobileye expand autonomous driving collaboration
- •Chinese battery giant CATL shrugs off EV sales slowdown to press on with expansion
- •Automakers score victory as Energy Department weakens EV mileage rule
- •China to challenge Biden’s electric vehicle plans at the WTO
- •First drive: BMW iX2 becomes the coupe-SUV it was always meant to be