InaRichardson - China Automobile Expert-CNAUTO

Perhaps some careful friends have discovered that the gap between the inner wall and the outline of the rear wheel on the cab side is very small. expressed concern about this. In fact, the original Ford factory has fully considered this issue and has made a full evaluation. The normal gap here is about 9 to 10mm to avoid contact with the brake oil pipe on the back. There have been no cases of interference with the tire so far. If no interference currently occurs, the risk of high-mileage interference is low, because there will be slight deformation in the direction perpendicular to the ground after normal use, and theoretically the gap will expand in the axial direction. The design gap here is about 9 to 10 mm. Through all current test verification, there is no interference risk. Therefore, friends who have discovered this situation don’t have to worry. Don’t go to a 4S store to handle it. Unless there is real interference. At present, some friends blindly go to the 4S sto...

Vehicles

Tyre

Auto Spareparts

Material

Const machinery & Agro equipment

Regarding the sharp left posterior contour inner wall gap is a normal design

The new conqueror will appear!